McAlpine Pipe Clamp

McAlpine Pipe Clamp

At Plumb Parts our McAlpine Fittings are available in following categories:

• Traps
• Wet Room Products
• WC Connectors
• Plastic & Chrome Fittings
• Overflow Fittings
• Air Admittance Valves
• Waste Outlet Fittings

The products sizes vary both in Imperial as well as Metric scales.

Product Description:

•  Available in White or Grey
•  Universal Connections for 19/23mm rigid pipe and 25mm flexible pipe
•  Suits 1¼”/1½” Pipe to BS EN 1451-1:2000/BS EN 1329-1:2000
•  Receives the discharge from a condensing boiler
•  Conforms to BS 6798:2009 and Building Regulations Approved Document H

Common Questions

What is the McAlpine pipe clamp used for? It clamps onto a 1 1/4 inch or 1 1/2 inch waste pipe so the condensate pipe from a condensing boiler can discharge into it.

What size pipe clamp do I need? This clamp suits 1 1/4 inch and 1 1/2 inch waste pipe. The condensate side takes 19/23mm rigid pipe or 25mm flexible pipe.

What colours does the McAlpine pipe clamp come in? It’s available in white or grey, so you can match it to your waste pipe.

Does it meet the building regulations? Yes, it conforms to BS 6798:2009 and Building Regulations Approved Document H.

How do I fit the pipe clamp? Follow the McAlpine installation instructions for the CLAMP1GR or CLAMP1WH, which are on our product page. The clamp goes onto the waste pipe and the condensate pipe connects to its universal outlet.

Datasheets

• McAlpine CLAMP1GR / CLAMP1WH Installation Instructions (PDF)