XPRESS YORKSHIRE PRESS-FIT COPPER MALE ELBOW 15mm to 54mm
Price range: £13.92 through £82.44 inc VAT ( Price range: £11.60 through £68.70 ex VAT)
The Xpress Yorkshire Press-Fit Copper Male Elbow is a 90 degree press to male thread elbow in 15mm x 1/2 inch, 15mm x 3/4 inch, 28mm x 1 inch, 35mm x 1.1/4 inch and 54mm x 2 inch. Sold at Plumb Parts in Glasgow.
| SKU | Thumbnail | SIZE | Price | Quantity | Total | ||
|---|---|---|---|---|---|---|---|
| PYE9015EM |
|
15mm x 3/4" | £16.36 inc VAT (£13.63 ex VAT) |
-
+
|
£16.36 inc VAT ({price_excluding_tax} ex VAT) | ||
| PYE9015DM |
|
15mm x 1/2" | £13.92 inc VAT (£11.60 ex VAT) |
-
+
|
£13.92 inc VAT ({price_excluding_tax} ex VAT) | ||
| PYE9028FM |
|
28mm x 1" | £33.70 inc VAT (£28.08 ex VAT) |
-
+
|
£33.70 inc VAT ({price_excluding_tax} ex VAT) | ||
| PYE9035GM |
|
35mm x 1.1/4" | £47.86 inc VAT (£39.88 ex VAT) |
-
+
|
£47.86 inc VAT ({price_excluding_tax} ex VAT) | ||
| PYE9054IM |
|
54mm x 2" | £82.44 inc VAT (£68.70 ex VAT) |
-
+
|
£82.44 inc VAT ({price_excluding_tax} ex VAT) |
The Xpress Yorkshire Press-Fit Copper Male Elbow turns 90 degrees from copper tube onto a male BSP thread. The press end goes on the pipe, and the threaded end screws into a female port on a valve, cylinder, manifold or other kit.
What it’s used for
It connects copper into a threaded female port where the pipe has to come in from the side. Common jobs include drain points, tapping into cylinder bosses, coming off a boiler or plant flow connection, and connecting to manifolds. It saves an adaptor and an elbow, which is one less joint to go wrong.
Use it on hot and cold water, heating and chilled water, as with the rest of the Xpress copper range. It is not for gas.
Sizes available
- 15mm x 1/2″
- 15mm x 3/4″
- 28mm x 1″
- 35mm x 1.1/4″
- 54mm x 2″
Fitting tips
Screw the thread in first and seal it with PTFE or a suitable paste, finishing at the angle you need. Then press the copper. Doing it the other way round means turning a pressed joint, which you shouldn’t do. Cut square, deburr, mark the depth.
The female elbow and straight adaptors are in our Xpress copper Press-Fit range.
Male elbows from the Glasgow shop
Come by the Plumb Parts trade counter at 555 South Street, Glasgow G14 0QX, or order online. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.
Specification
- Brand: Pegler Yorkshire
- Range: Xpress Copper
- Maker code: S13
- Connection: Press Fit with EPDM seal to male BSP thread, 90 degrees
- Sizes: 15mm x 3/4″, 15mm x 1/2″, 28mm x 1″, 35mm x 1.1/4″ and 54mm x 2″
- Standard or approval: EN 1254-7 press fittings, BSI certificate KM 789225 (water fittings)
- Max pressure: 16 bar
- Suitable for: Hot and cold water, heating and chilled water on hard and half-hard copper tube; not gas
Common Questions
Which male elbow suits a 1/2 inch drain point?
The 15mm x 1/2″ male elbow. A 15mm x 3/4″ is also listed for bigger ports on 15mm pipe.
Can I turn the elbow after pressing to line up the thread?
No. Screw the thread in to the angle you need first, then press. Turning a pressed joint can damage the seal.
Is the 54mm x 2″ for domestic use?
Not usually. It is mostly for plant rooms and commercial mains, where large threaded connections are common.
| SIZE |
15mm x 3/4" ,15mm x 1/2" ,28mm x 1" ,35mm x 1.1/4" ,54mm x 2" |
|---|
Related products
PEGLER YORKSHIRE XPRESS PRESS-FIT COPPER COUPLING 12mm to 108mm
Price range: £2.12 through £78.00 inc VAT ( Price range: £1.77 through £65.00 ex VAT)
XPRESS YORKSHIRE PRESS-FIT COPPER EQUAL ELBOW 12mm to 108mm
Price range: £2.27 through £246.41 inc VAT ( Price range: £1.89 through £205.34 ex VAT)
XPRESS YORKSHIRE PRESS-FIT GAS COPPER FEMALE ELBOW 15mm to 54mm
Price range: £8.28 through £51.84 inc VAT ( Price range: £6.90 through £43.20 ex VAT)