Home / Pipes Hoses & Insulation / Armaflex Class O Pipe Insulation 22mm x 19mm

Armaflex Class O Pipe Insulation 22mm x 19mm

£10.26 inc VAT (£8.55 ex VAT)

         

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Collection only. This item is not sent by courier. Order online and collect it from our counter at 555 South Street, Glasgow G14 0QX. Delivery and Returns

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

         

Armaflex Class O Pipe Insulation 22mm x 19mm puts 19mm of foam round 22mm pipe, in 2m lengths. It is good for heating mains in unheated voids. Pick it up at Plumb Parts in Glasgow.

SKUThumbnail Length Delivery Details PriceQuantityTotal
CO-19X022-A Armaflex Class O Pipe Insulation 22mm x 19mm - 2m - In Store Collection Only 2m In Store Collection Only £10.26 inc VAT (£8.55 ex VAT)
-
+
£10.26 inc VAT
✓
spinner
Description

Heating flow and return in 22mm copper often crosses lofts and floor voids, and Armaflex Class O Pipe Insulation 22mm x 19mm is a good match for those runs. It gives 22mm copper or plastic a 19mm sleeve of sealed-cell foam, so less heat is wasted before it reaches the radiators.

Fitting Armaflex Class O Pipe Insulation 22mm x 19mm

On a new install, feed each length on as the pipe goes in, before the joints are made. On an old system, run a knife down the tube, open it round the pipe and seal the split with Armaflex 520 glue. Seal the ends where two lengths meet as well, because a gap there is a cold spot. Keep the foam back from any joint that is still to be soldered.

  • Bore: 22mm, for copper or plastic
  • Wall: 19mm closed-cell foam
  • Fitted size: around 60mm across
  • Lengths: 2 metres

The 19mm wall sits between the light and heavy grades, so it suits cold voids where frost is a worry but space is tight. Once fitted it is about 60mm across, which still slips through most joist notches if they were cut with lagging in mind. Thinner and thicker options are listed in the pipes, hoses and insulation range.

Our Glasgow shop

The tube is for collection. Order on the website or pop in to Plumb Parts, 555 South Street, Glasgow G14 0QX, open Mon-Fri 8am-5pm and Sat-Sun 8am-1pm.

Specification

  • Brand: Armaflex
  • Range: Class O pipe insulation
  • Material: Flexible closed cell elastomeric (nitrile rubber) foam
  • Sizes: 22mm bore, 19mm wall, 2m lengths
  • Standard or approval: Class O fire performance, as named
  • Suitable for: Insulating 22mm pipe

Common Questions

Is 22mm x 19mm Armaflex suitable for heating pipes?

Yes, 22mm heating flow and return in plant rooms and ceiling voids is a typical use. The 19mm wall cuts heat loss well without taking up too much room.

How do I insulate a 22mm tee?

Cut a notch in the main tube and fit a short branch piece into it, then glue all the joints. A neat tee keeps the insulation sealed.

How many 22mm x 19mm lengths for an 18m run?

Nine 2m lengths cover 18m of straight pipe. Add a spare for tees, bends and valves.

Additional information
Length2m
Delivery DetailsIn Store Collection Only
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.