Home / Pipes Hoses & Insulation / Climaflex Pipe Insulation 10mm x 9mm

Climaflex Pipe Insulation 10mm x 9mm

£2.02 inc VAT (£1.68 ex VAT)

         

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Collection only. This item is not sent by courier. Order online and collect it from our counter at 555 South Street, Glasgow G14 0QX. Delivery and Returns

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

         

Climaflex pipe insulation 10mm x 9mm is polyethylene foam lagging for 10mm microbore pipe, with a 9mm wall, in 2m lengths. Lag radiator feeds with it to cut heat loss. Collect from Plumb Parts in Glasgow.

SKUThumbnail Length Delivery Details PriceQuantityTotal
PF10092C Climaflex Pipe Insulation 10mm x 9mm - 2m - In Store Collection Only 2m In Store Collection Only £2.02 inc VAT (£1.68 ex VAT)
-
+
£2.02 inc VAT
✓
spinner
Description

Microbore heating loses heat fast under floors, and Climaflex pipe insulation 10mm x 9mm is made to fit that 10mm pipe. It has a 9mm wall of closed cell polyethylene foam and comes in 2 metre lengths.

Climaflex pipe insulation for microbore

Lots of 1970s and 1980s houses have 10mm copper running from a manifold to each radiator. Where those pipes cross a cold void or a garage ceiling, the heat leaks away before it reaches the room. Lagging them means warmer radiators and less wasted gas. The 9mm wall is slim, so it still fits between joists and under boards.

  • Bore: 10mm, for 10mm pipe
  • Wall: 9mm
  • Length: 2m
  • Closed cell polyethylene foam
  • For water and heating pipework

Slide it on before the last joint is made, or slit it along its length with a sharp knife to fit existing pipe. Butt the lengths together tightly, then tape or glue the joins so there are no gaps. Small bore pipe bends easily, so the foam follows gentle curves without cutting.

Picking up lagging in Glasgow

Thicker walls and bigger bores are in our pipes, hoses and insulation section.

Plumb Parts has the counter at 555 South Street, Glasgow G14 0QX. Call in Mon-Fri 8am-5pm or Sat-Sun 8am-1pm, or put an order in online.

Specification

  • Brand: Climaflex
  • Material: Closed cell polyethylene foam
  • Sizes: 10mm bore, 9mm wall, 2m lengths
  • Suitable for: Insulating 10mm pipe
  • Standard/approval: Fire class Euroclass E (EN 13501-1)
  • Max temperature: 0°C to +100°C

Common Questions

What size pipe insulation do I need for 10mm pipe? Go by the outside of the pipe, so this 10mm bore is the one for 10mm microbore copper. With the 9mm wall it ends up roughly 28mm across, so make sure it’ll pass through your notches and clips.

How do I fit this lagging on pipe that’s already in? Slit it straight down one side with a sharp knife, open it up and push it over the pipe. Close the slit with tape or an adhesive that’s safe on polyethylene foam, and don’t stretch the foam as it shrinks back.

Is this pipe insulation heat resistant? It’s rated for pipe temperatures from 0°C to +100°C, so it’s fine on heating and hot water pipes. Keep it off flues, though.

Is this pipe insulation closed cell foam? Yes, Climaflex is closed cell polyethylene foam. That’s what lets it stop cold pipes sweating as well as keeping heat in.

Is Climaflex pipe insulation fire resistant? It carries a Euroclass E fire rating to EN 13501-1, which is a reaction to fire class rather than a fire barrier. Keep it away from flues and anything hotter than 100°C.

Will this lagging stop my pipes freezing? It slows heat loss, but no lagging will stop a pipe freezing forever in a long cold snap. The 9mm wall is meant for indoors, so for a cold loft or garage pick 19mm or 25mm instead.

Additional information
Length2m
Delivery DetailsIn Store Collection Only
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.