Home / McAlpine Products / McAlpine Waste Pipe Fittings / McAlpine 90 Deg Multifit Bend 1 1/2 inch | MT4-ISO

McAlpine 90 Deg Multifit Bend 1 1/2 inch | MT4-ISO

£3.74 inc VAT (£3.12 ex VAT)

         

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

         

McAlpine Plumbing Products are available at Plumb Parts Plumbers Merchants in Glasgow Open Monday to Friday 8am to 5pm, Saturday and Sunday 8am to 1pm or order online.

SKUThumbnail Size PriceQuantityTotal
MT4-ISO McAlpine 90 Deg Multifit Bend 1 1/2 inch | MT4-ISO - 1 1/2 1 1/2" (40mm) £3.74 inc VAT (£3.12 ex VAT)
-
+
£3.74 inc VAT
✓
spinner
Description

McAlpine 90 Deg Multifit Bend MT4-ISO

Specification

  • Brand: McAlpine
  • Maker code: MT4-ISO
  • Sizes: 1 1/2″ (40mm)

Common Questions

What size is the McAlpine MT4-ISO? It’s a 1 1/2 inch (40mm) 90 degree Multifit bend, the usual size for sink, bath and shower wastes.

Can you bend waste pipe instead of using a bend? Plastic waste pipe isn’t really meant to be bent, and forcing it can kink it and slow the flow. A moulded bend like the MT4-ISO gives a clean right-angle turn.

Can I run waste pipe through joists? You can, but holes and notches in joists have limits on size and position so the timber isn’t weakened. If in doubt, check building regulations guidance or ask a joiner before drilling.

Where would I use a 40mm 90 degree bend? Typically where a waste run turns a corner, such as going from vertical to horizontal under a trap on a sink or bath.

Is the MT4-ISO the same as the MT4? Both are listed as 1 1/2 inch (40mm) 90 degree Multifit bends. If you’re replacing a fitting, go by the code on the old one.

Do waste pipes need a fall? Yes, waste pipe should run with a gentle, steady fall towards the drain or stack so water doesn’t sit in the pipe.

Datasheets

Additional information
Size1 1/2″ (40mm)
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.