Home / MDPE and Alkathene Fittings / JG Speedfit MDPE Stop End 20mm to 25mm

JG Speedfit MDPE Stop End 20mm to 25mm

Price range: £6.28 through £11.38 inc VAT ( Price range: £5.23 through £9.48 ex VAT)

         

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

         

A JG Speedfit MDPE stop end caps the end of blue water pipe with a Push-Fit joint. Sizes 20mm, 25mm and 32mm, for sealing a supply for later use. On sale at Plumb Parts in Glasgow.

SKUThumbnail Size PriceQuantityTotal
UG4620B JG Speedfit MDPE Stop End 20mm to 25mm - 20mm 20mm £6.28 inc VAT (£5.23 ex VAT)
-
+
£6.28 inc VAT
✓
spinner
UG4625B JG Speedfit MDPE Stop End 20mm to 25mm - 25mm 25mm £11.38 inc VAT (£9.48 ex VAT)
-
+
£11.38 inc VAT
✓
spinner
Description

Push a JG Speedfit MDPE stop end onto blue water pipe and the end is sealed. There is no nut to tighten, and the cap can be pulled off again when the pipe is needed.

Uses for a JG Speedfit MDPE stop end

Builders lay supplies to plots, extensions and garden rooms long before anyone connects to them. A stop end keeps the pipe sealed and clean until then. It is also handy when you cut a supply back during a repair and need to get the house running again while you fetch parts. Because it is demountable, it comes off when the final connection is made.

  • Sizes: 20mm, 25mm and 32mm
  • Push-Fit cap for MDPE pipe
  • Can be removed and the pipe reused
  • Cold water services

Fit an insert in the pipe and push the pipe fully in. A capped pipe has full mains pressure behind it, so check it carefully before covering. If it is going to be buried for a while, note where it is, so whoever connects later can find it.

Stop ends from Plumb Parts in Glasgow

The rest of the system is in our MDPE and alkathene fittings listing.

Collect at 555 South Street, Glasgow G14 0QX, the Plumb Parts trade counter, open Mon-Fri 8am-5pm and Sat-Sun 8am-1pm. Online ordering is there too.

Specification

  • Brand: JG Speedfit
  • Range: MDPE cold water services fittings
  • Maker code: UG4620B (20mm), UG4625B (25mm)
  • Connection: Push Fit for MDPE pipe with pipe insert
  • Sizes: 20mm, 25mm and 32mm
  • Standard or approval: Water Regulations Advisory Scheme approved (JG Speedfit technical guide)
  • Max pressure: 16 bar at 20°C
  • Max temperature: Cold water only, rated at 20°C
  • Suitable for: Blue MDPE (PE80) cold water service pipe, above or below ground

Common Questions

Can I pull a Speedfit stop end off later?

Yes. With the water off, push the collet in and draw the stop end off the pipe. The pipe can then be connected to the next fitting.

Is a stop end safe on a live supply?

Yes, it is made to hold mains pressure on the pipe end. Check it carefully under pressure before you cover it.

Should a capped supply be marked?

Yes. Note where it is on a plan or with a marker, so the next person can find it without digging up the whole garden.

Datasheets

Additional information
Size

20mm

,

25mm

,

32mm

,

32X32X25mm

,

35X35mm

,

42X42mm

,

54X54mm

,

67X67mm

,

76X76mm

,

108X108mm

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.