Home / Boilers & Accessories / Boiler Accessories / Accessories by Brand / Plastic Coated 11″ x 9″ Circular Flue Terminal Guard

Plastic Coated 11″ x 9″ Circular Flue Terminal Guard

£12.50 inc VAT (£10.42 ex VAT)

         

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

         

This Plastic Coated 11″ x 9″ Circular Flue Terminal Guard fits round a round boiler flue terminal on an outside wall, protecting people and the terminal where it sits low or within reach. Buy it from Plumb Parts in Glasgow.

Description

The Plastic Coated 11″ x 9″ Circular Flue Terminal Guard is a round wire cage that screws to the wall over a boiler flue terminal. It stops people touching a hot terminal, and it protects the terminal from knocks, footballs and anything else that might hit it.

When you need a circular flue terminal guard

A guard is normally needed where the flue terminal is less than 2m above ground level, or above a balcony or flat roof that people can walk on. You see a lot of them on the back walls of houses beside paths and on the low-level flues of ground floor flats. The plastic (polyethylene) coating resists the wet weather and the acidic plume from a condensing boiler.

Specification

  • Material: Plastic coated
  • Sizes: 11″ diameter x 9″ depth
  • Suitable for: Round boiler flue terminals at low level

Common Questions

When does a boiler flue need a terminal guard?

Generally when the terminal is less than 2m above ground, or above a balcony or flat roof where people can reach it. The boiler maker’s flue instructions confirm what your model needs.

Will an 11″ x 9″ guard fit my flue terminal?

Measure the terminal and its distance from the wall. It needs to sit inside the guard with a clear gap all round, so the flue gases are not restricted.

Can I fit a flue guard myself?

Fixing a guard to the wall is simple, but it must not affect the flue or the terminal. Many owners have the Gas Safe engineer fit it at the boiler service.

Fitting tips for Glasgow walls

Check the terminal fits inside the guard with clearance all round before drilling anything. Centre the guard on the terminal, then mark and drill the fixing holes. Use fixings to suit the wall, such as stainless screws and plugs, so they do not rust and stain the render. The guard must not block or restrict the flue outlet. If you are not sure whether the boiler needs a guard, the manufacturer’s flue instructions and a Gas Safe engineer will tell you.

Want the Plastic Coated 11″ x 9″ Circular Flue Terminal Guard alongside other parts? See our flues and flue accessories.

You can buy online, or come along to Plumb Parts at 555 South Street, Glasgow G14 0QX and collect. Weekdays are Mon-Fri 8am-5pm, and weekend opening is Sat-Sun 8am-1pm.

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.