Home / Brass Fittings / Brass Slip Air Release Plug 15mm

Brass Slip Air Release Plug 15mm

£1.93 inc VAT (£1.61 ex VAT)

         

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

         

The Brass Slip Air Release Plug is a small 15mm brass fitting for letting trapped air out of a high point or the end of a pipe run. Ask for it at Plumb Parts in Glasgow.

Categories
SKUThumbnail Sizes PriceQuantityTotal
BRSARP15 Brass Slip Air Release Plug 15mm - 15mm 15mm £1.93 inc VAT (£1.61 ex VAT)
-
+
£1.93 inc VAT
✓
spinner
Description

The Brass Slip Air Release Plug 15mm is a small brass fitting for 15mm pipework, used to let out air that’s trapped at a high point or the end of a run. Air locks cause noise, poor flow and cold spots, and a release point where the air collects makes them easier to clear.

What it’s used for

Air collects at the highest point of a system and at dead ends, so that’s where a release plug earns its keep. Typical places are a high level heating run, a pipe that rises and drops over a doorway, or the end of a branch that’s been capped. Opening the plug a little lets the air hiss out until water appears, then you close it up again.

Before you buy

There is no maker’s data sheet for this item, so no pressure or temperature rating is given. Bring along the fitting or a photo of where it’s going, and the counter staff will check it matches your 15mm pipe or fitting.

Specification

  • Material: Brass
  • Sizes: 15mm
  • Suitable for: Releasing air at high points on 15mm pipework

Common Questions

Where should an air release plug go?

At the highest point of the run or the end of a dead leg, where air collects. Fit it lower and the air sits beyond it.

Will an air release plug work on a water supply?

It lets air out of any 15mm run it is fitted to, but check it is suitable for drinking water before using it on a mains supply. Ask at the counter if you are unsure.

How far should I open the air release plug?

Only a little, until the air hisses out. Close it as soon as a steady flow of water appears.

Fitting tips from Glasgow

Fit it at the true high point, otherwise air will sit just beyond it. Keep a rag and a small container handy when you open it, as heating water is dirty and can be hot. Open it slowly, close it as soon as you get a steady stream of water, and check the system pressure afterwards on a sealed heating system. The Brass Slip Air Release Plug is listed under brass fittings.

Plumb Parts sells it from 555 South Street, Glasgow G14 0QX. Visit Mon-Fri 8am-5pm or Sat-Sun 8am-1pm, or place an order on the website.

Additional information
Sizes15mm
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: N/A Category: