Rothenberger Pipeslice 22mm

One-handed and compact, the Rothenberger Pipeslice 22mm cuts 22mm copper pipe. It snaps on, sets itself to the pipe and locks, then cuts as you turn it, without needing room to swing a full-size cutter.

Where the Rothenberger Pipeslice 22mm helps

22mm usually runs along walls, under floors and up to the boiler, often tight to whatever it is clipped to. The Pipeslice gets round the pipe where there is very little clearance. It avoids crushing the tube and the outside burr that can spoil a joint. So the end is ready for a fitting with little extra work.

• Brand: Rothenberger
• Size: 22mm copper pipe
• Self-adjusting and self-locking
• Spare cutter wheel available

Push the tool onto the pipe at your mark and rotate it round the pipe until it parts. Keep it free of grit and swarf, as dirt wears the wheel. When cuts start to drag, fit a new wheel rather than forcing it. The 28mm Pipeslice and other cutters sit in our pipe slice category.

A 22mm pipe slice, sold in Glasgow

Come in to Plumb Parts, 555 South Street, Glasgow G14 0QX. Shutters up Mon-Fri 8am-5pm and Sat-Sun 8am-1pm. Online ordering is available any time.

Specification

• Brand: Rothenberger
• Range: Pipeslice
• Sizes: 22mm
• Suitable for: One-handed cutting of 22mm copper pipe

Common Questions

Does the Rothenberger Pipeslice 22mm cut other sizes?

No, each Pipeslice is made for one pipe size. For any other size you need the matching Pipeslice.

When should I change the Pipeslice wheel?

Once cuts take noticeably more turns or start to drag, the wheel is worn. A new wheel brings it back to a clean, quick cut.

Can I use a 22mm pipe slice on chrome pipe?

It will cut 22mm chrome plated copper, but go gently so the plating does not chip at the cut. Keep the tool clean so grit does not mark the finish.