Viva Flush Pipe Nut & Seal 2 inch | PP0009/A

2″ Flush Pipe Nut & Seal

Used for coupling a 2″ flush pipe to a flush valve.

Specification

• Brand: Viva Sanitary
• Maker code: PP0009/A
• Sizes: 2″

Common Questions

What is a flush pipe seal? It’s the washer that sits under the nut where the flush pipe meets the flush valve on the cistern, stopping water seeping out at that joint. The PP0009/A gives you the nut and seal in the 2 inch size.

How do I replace the seal on my toilet flush pipe? Turn off the water to the cistern and flush it empty, then undo the nut underneath and ease the flush pipe away. Slip the new seal on, push the pipe back up into the valve and nip the nut up, then refill and check for drips.

How do I get a watertight seal on a flush pipe? Make sure the pipe end is clean and sits square into the valve outlet, with the seal seated evenly before you tighten the nut. Go firm but don’t force it, as overtightening can squash the seal out of shape.

What is a flush pipe? It’s the pipe that carries water from the cistern down into the toilet pan when you flush. This nut and seal joins its top end to the flush valve.

What size flush pipe does the PP0009/A suit? It’s made for 2 inch flush pipe only. Measure your flush valve outlet before ordering, as a smaller pipe won’t seal in it.