Wire Wool Pads
£3.12 inc VAT (£2.60 ex VAT)
✓ In Stock
Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.
Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns
Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.
Wire Wool Pads for cleaning copper tube and fittings before soldering. Rubs off oxide and dirt so the flux and solder take properly. Plumb Parts, Glasgow, sells them.
Wire Wool Pads are for cleaning copper before you solder. A quick rub round the pipe end and inside the fitting takes off the dull oxide and dirt, so the flux and solder can bond to bare metal.
Why wire wool pads matter for soldering
Many dry or weeping solder joints come down to poor cleaning. Copper tarnishes in the air, and a layer of oxide stops solder flowing into the joint. So the pipe and fitting need to be bright before flux goes on. A pad is quick, folds round the pipe and also cleans the inside of a fitting socket with a finger behind it.
- Wire wool cleaning pads
- For copper tube ends and fitting sockets
- Use before fluxing and soldering
- Also handy for general cleaning of metal parts
Clean just past the depth the pipe goes into the fitting, until the copper is bright all round. Wipe away any loose strands, as bits of wool left in a joint can cause problems. Do not touch the cleaned area with greasy fingers. Flux both parts thinly, assemble, then heat. More soldering kit is in our tool accessories section.
Specification
- Suitable for: Cleaning copper tube ends and fitting sockets before soldering
Common Questions
Why will solder not take on my copper pipe?
The usual cause is poor cleaning or not enough flux. Rub the pipe and the inside of the fitting bright, flux both, and heat the fitting rather than the pipe.
Do I need to clean new copper pipe before soldering?
Yes. New pipe still has a thin layer of oxide and grease from handling, so give it a quick rub every time.
What is the difference between wire wool and steel wool?
In the trade the two names are used for the same thing: fine steel strands for cleaning metal. Pads are simply ready shaped.
Picking up wire wool in Glasgow
Try Plumb Parts, 555 South Street, Glasgow G14 0QX. It opens Mon-Fri 8am-5pm and Sat-Sun 8am-1pm. The website takes orders as well.
Only logged in customers who have purchased this product may leave a review.

Reviews
There are no reviews yet.