Caleffi Pressure Reducing Valve 1″
£119.99 inc VAT (£99.99 ex VAT)
✓ In Stock
Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.
Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns
Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.
This Caleffi pressure reducing valve 1 inch sets a lower, steady outlet pressure on a 1 inch supply. It protects fittings where mains pressure runs high. From Plumb Parts in Glasgow.
This Caleffi pressure reducing valve 1 inch is for supplies that are too big for a 22mm valve but do not need the larger commercial sizes. It cuts down high incoming pressure and keeps the outlet steady.
Where a Caleffi pressure reducing valve 1 inch fits
Think of a larger house with a 1 inch main, a small block of flats or a shop unit. High pressure there can mean noisy pipes, dripping taps and stress on water heaters and appliances. A reducing valve straight after the stopcock settles all of that. It also helps when equipment downstream asks for a maximum inlet pressure.
- Size: 1 inch
- Made by Caleffi
- Gives a set, stable outlet pressure
- Fitted on the incoming cold supply
Put an isolating valve before it, so the valve can be serviced without shutting the whole building off at the street. A strainer upstream keeps grit out of the seat. Mind the flow arrow, and seal the threads with PTFE or a suitable paste. Set the outlet with a gauge, then open a tap and see that the pressure holds steady under flow.
Larger PRVs at our Glasgow shop
Smaller and bigger sizes are listed under pressure reducing valves.
Plumb Parts opens its counter at 555 South Street, Glasgow G14 0QX, Mon-Fri 8am-5pm and Sat-Sun 8am-1pm. Ordering online is also possible.
Specification
- Brand: Caleffi
- Sizes: 1″
- Suitable for: Mains cold water supplies
Common Questions
How do I adjust the Caleffi pressure reducing valve? Set it with no water running, reading the outlet on a gauge, then open a tap and make sure it holds under flow. The data sheet gives the adjustment range for your model.
How do I keep a Caleffi pressure reducing valve clean? A strainer fitted before the valve stops grit reaching the seat in the first place. Isolating valves either side let you take it out for servicing, and Caleffi’s instructions cover stripping it down.
What size pressure reducing valve do I need? Size it to the supply pipe and the flow the building needs. A 1 inch valve is for larger homes, flats, commercial premises and plant rooms where a 15mm or 22mm valve would not pass enough water.
Why would I fit a pressure reducing valve? It holds the outlet below what the main is delivering, whatever the street pressure is doing. That means less noise, less splashing and water hammer, and less strain on fittings and appliances.
How should the valve be installed? Follow the flow arrow on the body and leave room to get at the adjusting head and any gauge port. Isolating valves on both sides make future servicing much easier.
What is the maximum inlet pressure for this valve? Check the model and data sheet for the inlet limit, adjustment range and temperature limit before ordering. Give us a call if you would like us to look it up.
Only logged in customers who have purchased this product may leave a review.

Reviews
There are no reviews yet.