Directional Air Vent 1/2″
£1.21 inc VAT (£1.01 ex VAT)
✓ In Stock
Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.
Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns
Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.
A 1/2″ directional air vent for a radiator tapping, letting you bleed trapped air while pointing the outlet where you want the drips to go. Handy on rads with little clearance round the top corner. Sold by Plumb Parts in Glasgow.
This directional air vent screws into a 1/2″ radiator tapping and gives you a way to let trapped air out of the rad. The outlet can be turned, so you can aim it away from the wall or the carpet before you open it up.
Why choose a directional air vent
Air builds up in every heating system over time. You notice it as a radiator that is warm at the bottom and cold along the top. Bleeding it out brings the heat back, but the water that follows the air has to go somewhere. Because the outlet on this one can be set to face a sensible direction, it is easier to catch that spurt with a cloth or a small tub.
- Size: 1/2″ thread to suit the radiator tapping
- Swivelling outlet so you can choose the direction
- Fitted in the top corner tapping of a panel or column rad
- Used on central heating radiators for bleeding air
Wrap a few turns of PTFE on the thread, or use the sealing washer if one is supplied, and nip it up firmly without going overboard. On a sealed system, check the boiler pressure after bleeding, since you will have let a little water out. If the gauge has dropped, top it back up through the filling loop.
You will find more bits for rads in our radiators and accessories section.
Specification
- Connection: 1/2″ thread for a radiator tapping
- Sizes: 1/2″
- Suitable for: Bleeding air from central heating radiators
Common Questions
Will a 1/2″ air vent fit my radiator?
Most steel panel rads have 1/2″ tappings in the top corners, so this vent suits the majority of them. Some designer and column rads use smaller threads, so measure the old vent or bring it in before you swap it.
How often should a radiator be bled?
Bleed it whenever the top of the rad stays cold while the bottom is hot, and as a check before the winter. If one rad needs bleeding every week, something is drawing air into the system and it is worth getting it looked at.
Do I need to switch the heating off before opening the vent?
Yes. Turn it off and let the rad cool so the water is not hot and the pump is not pushing air round while you bleed it. Turn the heating back on once the vent is shut and the pressure is checked.
Picking up radiator vents in Glasgow
Pop in and see the team at Plumb Parts, 555 South Street, Glasgow G14 0QX. Doors are open Mon-Fri 8am-5pm and Sat-Sun 8am-1pm, or you can buy it online any time.
Only logged in customers who have purchased this product may leave a review.

Reviews
There are no reviews yet.