Female Threaded Brass 90 Deg Elbow 1/8 inch to 2 inch
Price range: £1.40 through £25.46 inc VAT ( Price range: £1.17 through £21.22 ex VAT)
Free Click and Collect from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.
Turn a threaded run through a right angle with the Female Threaded Brass 90 Deg Elbow. Both ends take a male thread, in sizes 1/8″ to 2″, for water and heating pipework. Ask for it at Plumb Parts, Glasgow.
| SKU | Thumbnail | Size | Price | Quantity | Total | ||
|---|---|---|---|---|---|---|---|
| PR11263 |
|
1/8" | £2.12 inc VAT (£1.77 ex VAT) |
-
+
|
£2.12 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR01179 |
|
1/4" | £1.72 inc VAT (£1.43 ex VAT) |
-
+
|
£1.72 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR01180 |
|
3/8" | £1.40 inc VAT (£1.17 ex VAT) |
-
+
|
£1.40 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR01181 |
|
1/2" | £2.50 inc VAT (£2.08 ex VAT) |
-
+
|
£2.50 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR01182 |
|
3/4" | £2.98 inc VAT (£2.48 ex VAT) |
-
+
|
£2.98 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR01183 |
|
1" | £4.34 inc VAT (£3.62 ex VAT) |
-
+
|
£4.34 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR11264 |
|
1.1/4" | £7.54 inc VAT (£6.28 ex VAT) |
-
+
|
£7.54 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR11265 |
|
1.1/2" | £10.86 inc VAT (£9.05 ex VAT) |
-
+
|
£10.86 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR11266 |
|
2" | £25.46 inc VAT (£21.22 ex VAT) |
-
+
|
£25.46 inc VAT ({price_excluding_tax} ex VAT) |
Female Threaded Brass 90 Deg Elbow
Female Threaded Brass 90 deg elbow with female ends used to connect two pipes with threaded male ends.
Brass Fittings
Brass fittings are in high demand because of some inherent properties which make them superior to other materials and are suitable for carrying water, gases, chemicals, fire sprinkler systems, etc. Brass and DZR fittings are designed and manufactured in sizes ranging from 1/8″ to 4″.
They are available in either BSPT parallel or taper threads to BS EN 10226-BSPT parallel or taper threads to BS EN 10226-1:2004/BS 21 – ISO7/1.
Most brass threaded fittings are hot forged, giving them greater strength to weight ratio.
Fittings made of brass are available in a wide variety of shapes and thread sizes to connect, control any air or liquid flow in a pipe or tube.
Brass as a material is easily machined and so can be given any shapes of the various types of fittings available.
Specification
- Material: Brass
- Connection: Female BSP thread on both ends
- Sizes: 1/8″ to 2″
Common Questions
What is a female threaded elbow used for?
It turns a threaded run through 90 degrees, with a male thread or nipple screwed into each end. Both ends are the same size.
Do I need a male x female elbow instead?
Use an MxF elbow when one side screws straight into a female fitting. It saves a nipple.
How do I stop a brass elbow cracking?
Do not over-tighten. Seal the thread properly and stop once it is firm, as excess force can split the female end.
| Size |
1/8" ,1/4" ,3/8" ,1/2" ,3/4" ,1" ,1.1/4" ,1.1/2" ,2" |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
Brass Bullet Manifold 22mm
Price range: £1.92 through £3.12 inc VAT ( Price range: £1.60 through £2.60 ex VAT)
Brass Cap 1/8 inch to 2 inch
Price range: £0.60 through £6.30 inc VAT ( Price range: £0.50 through £5.25 ex VAT)
Reviews
There are no reviews yet.