FloPlast 135 Deg Branch TEE-WS42 32mm
£1.01 inc VAT (£0.84 ex VAT)
✓ In Stock
Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.
Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns
Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.
Swept entry tee: the FloPlast ABS solvent waste 135 deg branch joins a side waste at a swept 45 degree angle, in 32mm or 40mm, white or grey. From Plumb Parts in Glasgow.
| SKU | Thumbnail | Size | Colour | Price | Quantity | Total | ||
|---|---|---|---|---|---|---|---|---|
| WS42 |
|
32mm | White | £1.01 inc VAT (£0.84 ex VAT) |
-
+
|
£1.01 inc VAT |
Two wastes into one: the FloPlast ABS solvent waste 135 deg branch brings a second waste into a run at a swept angle instead of a square one. It is a Solvent Weld tee from the FloPlast ABS range, offered here in 32mm and 40mm.
Using a FloPlast ABS solvent waste 135 deg branch
With a square tee, water from the side pipe slams into the main flow. This branch angles the incoming pipe downstream, so the two flows merge smoothly and one appliance is less likely to push water back up the other. In 32mm it suits two basins on one waste. The 40mm size works for a bath and shower, or a sink and dishwasher.
Dry fit the run and pencil a line across the joint, because the branch has to point down the flow and solvent cement grabs fast. Clean both surfaces, coat them with solvent cement, push home with a small twist and hold for a moment. Wipe off the excess.
Picking one up in Glasgow
Bends, couplers and clips to match sit in the Flexible range on the site. Plumb Parts keeps the counter at 555 South Street, Glasgow G14 0QX, open for collection Mon-Fri 8am-5pm and Sat-Sun 8am-1pm, or order online.
Specification
- Brand: FloPlast
- Range: ABS Solvent Weld Waste
- Maker code: WS42
- Material: ABS
- Connection: Solvent Weld sockets
- Sizes: 32mm and 40mm
- Standard or approval: BS EN 1455-1, Kitemark KM 548614
- Max temperature: 70°C to 75°C continuous; hotter discharges for 2 minutes at most
- Suitable for: Bringing a second waste into a run at a swept 135 degree angle
Common Questions
What does a 135 degree branch do better than a square tee?
The side waste enters already pointing downstream, so the two flows merge instead of colliding. One appliance is then less inclined to back water up its neighbour.
How long before I can run water through it?
FloPlast say the cement starts to grab within a minute or two. Leave the joints two to three hours before short discharges, and a full day before anything running continuously.
Can I glue it to Push-Fit polypropylene pipe?
No. Solvent cement does not bond to polypropylene. To join ABS to Push-Fit waste, use a Compression waste fitting between the two.
Datasheets
| Size | 32mm, 40mm |
|---|---|
| Colour | White, Gray |
Only logged in customers who have purchased this product may leave a review.
Related products
FloPlast Bottle Trap 76mm Seal
Price range: £5.60 through £6.80 inc VAT ( Price range: £4.67 through £5.67 ex VAT)
Reviews
There are no reviews yet.