Home / Bathroom and Kitchen / FloPlast Traps / FloPlast Bottle Trap 38mm Seal

FloPlast Bottle Trap 38mm Seal

Price range: £4.84 through £6.91 inc VAT ( Price range: £4.03 through £5.76 ex VAT)

         

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

         

The FloPlast Bottle Trap 38mm Seal is a white plastic waste trap for basins, in 32mm or 40mm. Its shallower water seal helps where space under the basin is tight. Get it at Plumb Parts in Glasgow.

Categories
SKUThumbnail Size Colour PriceQuantityTotal
TB33 FloPlast Bottle Trap 38mm Seal - 32mm - White 32mm White £4.84 inc VAT (£4.03 ex VAT)
-
+
£4.84 inc VAT
✓
spinner
TB43 FloPlast Bottle Trap 38mm Seal - 40mm - White 40mm White £6.91 inc VAT (£5.76 ex VAT)
-
+
£6.91 inc VAT
✓
spinner
Description

A FloPlast Bottle Trap 38mm Seal sits under a basin and holds a small pool of water that stops drain smells coming back up the waste. The bottle shape keeps it compact, and the bottom unscrews so you can clear hair and soap without taking the trap off.

Where the 38mm seal bottle trap fits in

Bathroom basins and cloakroom handbasins are the usual home for it, especially in vanity units where a deeper trap would hit the shelf. Because the water seal is 38mm rather than the deeper 76mm, it takes up less height. That also means you should check the waste run is short and well vented, so the seal is not pulled out when the basin empties.

Pick the 32mm version for a normal basin waste, and the 40mm one if the pipe out of the room is the bigger size.

Fitting it: advice from a Glasgow merchant

Screw the top nut onto the basin waste by hand with its washer in place, then line the outlet up with the waste pipe. Push the pipe into the Compression end, and tighten the nut firmly by hand. Keep sealant and PTFE off the trap threads, as the washers do the sealing. Fill the basin, pull the plug, and check every joint for drips before you close the cabinet.

The FloPlast Bottle Trap 38mm Seal sits with the other patterns under FloPlast traps.

Pop into Plumb Parts at 555 South Street, Glasgow G14 0QX, Mon-Fri 8am-5pm or Sat-Sun 8am-1pm, and collect it from the counter. Ordering online works too.

Specification

  • Brand: FloPlast
  • Range: Waste Traps
  • Maker code: TB33 (32mm), TB43 (40mm)
  • Material: White polypropylene
  • Connection: Threaded top nut onto the waste, Compression outlet
  • Sizes: 32mm and 40mm, 38mm water seal
  • Standard or approval: BS EN 274-1
  • Suitable for: Basins where there is little height under the waste

Common Questions

Is a 38mm seal deep enough for a bathroom basin?

It works on a short, simple waste run. Where a basin joins a shared soil stack, a deeper 76mm seal is the safer choice, because the water is less likely to be pulled out.

How do I clear a blocked bottle trap?

Put a basin under it, unscrew the bottom pot by hand and pull out the hair and soap. Check the washer is seated before you screw it back on.

Does a bottle trap need PTFE on the threads?

No. The washers make the seal on a plastic trap, so tape or paste on the threads can stop the nut seating properly.

Datasheets

Additional information
Size32mm, 40mm
ColourWhite
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: N/A Category: Tag: