FloPlast Solvent Soil 90° Spigot/Socket Bend – SS168 110mm

The FloPlast Solvent Soil 90 Degree Spigot/Socket Bend SS168 makes a square turn on 110mm solvent weld soil pipe. It comes in 110mm only, in olive grey or black. This FloPlast 110mm soil bend suits plumbers and builders putting in glued soil stacks, WC branches and runs that change direction under a floor.

One end is a solvent weld socket that takes plain ended 110mm soil pipe. The other is a spigot that goes into the socket of the next fitting, which keeps the turn tight. Joints are made with FloPlast solvent cement, sold separately. Once set they are permanent, so dry fit the run and mark it before you glue. Wipe both faces clean, brush on cement, push together and hold still for a few seconds.

This is genuine FloPlast stock. Collect from our Glasgow shop or order online.

Specification

• Brand: FloPlast
• Range: 110mm Solvent Soil
• Maker code: SS168
• Material: PVC-U
• Connection: Solvent weld socket x spigot, 90 degrees
• Sizes: 110mm, olive grey or black
• Standard/approval: BS EN 1329-1, Kitemarked
• Max temperature: 70°C to 75°C continuous discharge
• Suitable for: Above ground soil discharge pipework

Common Questions

Can you solvent weld 110mm soil pipe with the SS168 bend? Yes, the SS168 is part of FloPlast’s 110mm solvent soil system. The socket end takes plain ended 110mm soil pipe, joined with FloPlast solvent cement sold separately.

How do I solvent weld the SS168 soil bend? Dry fit the run and mark it first, as the joints are permanent once set. Wipe both faces clean, brush on the cement, push together and hold still for a few seconds.

Does the FloPlast SS168 soil bend come in black? Yes, it comes in black or olive grey, in 110mm only.

Can a soil pipe have a bend in it? Yes, bends are how a soil run changes direction, and the SS168 gives a square turn on 110mm solvent soil. Keep tight bends to a minimum where you can and leave access for rodding.

Can I use the SS168 bend underground? No, it’s made for above ground soil pipework. For buried runs, use a below ground drainage system.

Can I glue FloPlast solvent soil in cold weather? You can, but the cement is slower to set when it’s cold. Leave the joints longer before you put any load or test on the run.

Datasheets

• FloPlast Soil & Waste Systems Brochure (PDF)

Collect from our Glasgow shop at 555 South Street, Glasgow G14 0QX, open Mon-Fri 8am-5pm and Sat-Sun 8am-1pm, or order online for delivery.