Home / Pipes Hoses & Insulation / Hep2O Pipe / Hep2O Standard Pipe Coils 15mm to 22mm

Hep2O Standard Pipe Coils 15mm to 22mm

Price range: £45.36 through £174.37 inc VAT ( Price range: £37.80 through £145.31 ex VAT)

         

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns

Delivered Free in Glasgow. Free delivery to any G postcode, or collect in store from 555 South Street, Glasgow G14 0QX.

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

         

Hep2O Standard Pipe Coils in 15mm and 22mm, each in 25m or 50m. Long runs of polybutylene for hot and cold water, threaded under floors and through joists with few joints. Pick it up at Plumb Parts in Glasgow.

SKUThumbnail Size x Length PriceQuantityTotal
HXP25/15W Hep2O Standard Pipe Coils 15mm to 22mm - 15mm X 25m 15mm X 25m £45.36 inc VAT (£37.80 ex VAT)
-
+
£45.36 inc VAT
✓
spinner
HXP50/15W Hep2O Standard Pipe Coils 15mm to 22mm - 15mm X 50m 15mm X 50m £86.40 inc VAT (£72.00 ex VAT)
-
+
£86.40 inc VAT
✓
spinner
HXP25/22W Hep2O Standard Pipe Coils 15mm to 22mm - 22mm X 25m 22mm X 25m £85.08 inc VAT (£70.90 ex VAT)
-
+
£85.08 inc VAT
✓
spinner
HXP50/22W Hep2O Standard Pipe Coils 15mm to 22mm - 22mmX 50m 22mmX 50m £174.37 inc VAT (£145.31 ex VAT)
-
+
£174.37 inc VAT
✓
spinner
Description

Long, joint-free runs are what Hep2O Standard Pipe Coils give you, in polybutylene pipe, in 15mm and 22mm and in 25m or 50m coils. Standard pipe has no oxygen barrier, so its main job is hot and cold domestic water.

Typical jobs are replumbing a flat or house, running new feeds under floors or through joists, and anywhere a long continuous run saves joints. Polybutylene is flexible enough to thread through notched joists and around obstacles. For heating circuits, barrier pipe is the usual pick.

Hep2O Standard Pipe Coils sizes

  • 15mm x 25m and 15mm x 50m
  • 22mm x 25m and 22mm x 50m
  • Flexible enough to thread through notched joists

The 25m coil suits a bathroom or kitchen refit; a 50m coil is the better buy for a whole-house job.

Cut only at a printed ‘^’ mark using plastic pipe cutters, keep the end burr-free, and fit a Hep2O SmartSleeve before pushing into a fitting. Clip the pipe properly along its run, as plastic sags between supports more than copper. Do not use it for gas, oil or buried supply pipes.

Fittings, SmartSleeves and straight lengths are in our Hep2O pipe range.

Glasgow collection for Hep2O coils

Get it online or at Plumb Parts, 555 South Street, Glasgow G14 0QX. Mon-Fri 8am-5pm and Sat-Sun 8am-1pm are the hours.

Specification

  • Brand: Hep2O
  • Range: Hep2O Standard Pipe in 25m and 50m coils
  • Material: Polybutylene without a barrier layer
  • Connection: Hep2O Push Fit, with a SmartSleeve in each cut end
  • Sizes: 15mm x 25m, 15mm x 50m, 22mm x 25m and 22mm x 50m
  • Standard or approval: Hep2O pipe and fittings are made to Class S, BS 7291 Parts 1 and 2
  • Suitable for: Hot and cold domestic water
  • Pack quantity: One coil per size chosen
  • Max pressure: 12 bar at 20°C, 6 bar at 95°C
  • Max temperature: Up to 95°C
  • Guarantee: 50 years

Common Questions

Is a 50m coil better value for a full replumb?

On a whole house it usually is, because you avoid joining short ends and wasting offcuts. For a single room, 25m is easier to handle and store.

Can standard Hep2O run outside?

Keep it out of sunlight and frost. If any has to pass through a cold space, lag it well and keep it out of direct light.

How do I undo a joint on Hep2O?

Release the grab ring with a HepKey on Key fittings, then pull the pipe out. Cut a fresh end and use a new sleeve if the old end looks scored.

Datasheets

Additional information
Size x Length15mm X 25m, 15mm X 50m, 22mm X 25m, 22mmX 50m
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.