Home / John Guest Speedfit / JG Speedfit Stop End 10mm to 28mm

JG Speedfit Stop End 10mm to 28mm

Price range: £3.73 through £7.91 inc VAT ( Price range: £3.11 through £6.59 ex VAT)

         

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

         

JG Speedfit push-fit stop end for capping copper or plastic pipe, 10mm to 28mm. Collect from 555 South Street, Glasgow.

SKUThumbnail Size PriceQuantityTotal
PSE4610W JG Speedfit Stop End 10mm to 28mm - 10mm 10mm £4.20 inc VAT (£3.50 ex VAT)
-
+
£4.20 inc VAT
✓
spinner
PSE4615W JG Speedfit Stop End 10mm to 28mm - 15mm 15mm £3.73 inc VAT (£3.11 ex VAT)
-
+
£3.73 inc VAT
✓
spinner
PSE4622W JG Speedfit Stop End 10mm to 28mm - 22mm 22mm £4.73 inc VAT (£3.94 ex VAT)
-
+
£4.73 inc VAT
✓
spinner
PSE4628W JG Speedfit Stop End 10mm to 28mm - 28mm 28mm £7.91 inc VAT (£6.59 ex VAT)
-
+
£7.91 inc VAT
✓
spinner
Description

The JG Speedfit Stop End caps off the end of a pipe with a push-fit joint. We stock it in 10mm, 15mm, 22mm and 28mm. A push fit stop end 22mm is handy for capping a heating or water run you have cut back, or a tail you will extend later, without draining and soldering.

It fits JG Speedfit plastic barrier pipe and copper pipe of the same size. On plastic pipe, push a Speedfit pipe insert into the pipe end first. Cut the pipe square, clean off any burr, mark the insertion depth and push the pipe in firmly until it reaches the mark. The collet has stainless steel teeth that grip the pipe and an O-ring that seals it. Give it a pull back to check it has locked.

This is genuine John Guest stock. Pick it up from our Glasgow shop or order online.

Specification

  • Brand: JG Speedfit (John Guest)
  • Maker code: PSE4610W (10mm), PSE4615W (15mm), PSE4622W (22mm)
  • Material: Plastic
  • Connection: Push-fit
  • Sizes: 10mm, 15mm, 22mm, 28mm
  • Standard/approval: WRAS approved (JG Speedfit fittings)
  • Max pressure: 12 bar cold at 20°C, 6 bar hot water, 3 bar central heating
  • Max temperature: 95°C
  • Suitable for: Hot and cold water and central heating. Not for gas, oil or compressed air
  • Guarantee: 50 years when used with JG Speedfit barrier pipe

Common Questions

How do you use a push fit stop end?

Cut the pipe square and deburr it, fit an insert if it is plastic pipe, then push the stop end on until it reaches the insertion mark. Pull back on it to make sure the teeth have gripped.

How do you remove a push fit stop end?

Turn off and drain the pipe first. Push the collet squarely into the fitting, hold it there and pull the stop end off. A collet release tool makes this easier.

Do I need an insert with a Speedfit stop end?

Yes on plastic pipe, so the pipe holds its shape and seals. You do not need one on copper pipe.

Datasheets

Collect from our Glasgow shop at 555 South Street, Glasgow G14 0QX, open Mon-Fri 8am-5pm and Sat-Sun 8am-1pm, or order online for delivery.

Additional information
Size10mm, 15mm, 22mm, 28mm
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.