Pegler XPress Press-Fit Gas Copper Reducing Branch Tee 22mm to 108mm

Pegler XPress Press-Fit Gas Copper Reducing Branch Tee

This is a gas reducing branch tee: the run stays one size and the side outlet is smaller. It is listed from 22 x 22 x 15mm up to 108 x 108 x 76.1mm, and the full set of sizes is in the Specification below.

Use it to take a smaller supply off a larger gas main, for example 15mm off a 28mm run (28 x 28 x 15mm). Fitting and testing is a job for a Gas Safe registered engineer.

Plumb Parts stocks the full Pegler XPress Press-Fit Fittings range, in sizes from 15mm to 108mm.

Other fitting types in the Pegler XPress Press-Fit system: Copper Straight Couplers, Copper Reducing Couplers, Copper Straight Coupling Slips, Copper Straight Female Connectors, Copper Straight Male Connectors, Copper Male Reducers, Copper Female Adaptors, Copper Male Adaptors, Copper Union Coupling, Copper Equal Elbows, Copper Reduced Elbows, Copper Street Elbows, Copper Knuckle Elbows, Copper Male Elbows, Copper Female Elbows, Copper Back plate Elbows, Copper Long Pattern BackPlate Elbows, Copper 90deg Bends, Copper 45 deg Elbows, Copper Obtuse Street Elbows, Copper Crossover, Copper Partial Crossovers, Copper Full Crossovers, Copper Equal Tees, Gas Copper Reduced Branch tees, Copper One End Reduced Tees, Copper One End Reduced And End Branch reduced Tees, Copper Both End Reduced Tees, Copper Female Branch Tees, Copper Multi Port Female Branch Tees, Copper Stop Ends, Copper Unions, Copper Straight Male Union Connectors, Copper Straight Female Union Connectors.

Xpress copper press-fit suits houses, commercial buildings and industrial plant alike. Joints go together quickly with no flame, and the fittings are designed to work as one complete system.

What the Xpress system offers

• Carries the BSI Kitemark to BS 8537:2010
• Gas rating: -20°C to +70°C
• Gas rating: 5 bar on external above-ground pipework, 1 bar inside buildings
• With Leak Before Press, a fitting left unpressed will leak on test, so it cannot be missed
• Holds many UK and international approvals
• Pressing takes less time and labour than conventional jointing
• Cold jointing with no naked flame, so there is no hot works permit or insurance to arrange

Full gas limits are in the Specification below.

Specification

• Brand: Pegler XPress
• Range: Xpress Copper Gas
• Maker code: SG25; article numbers 39382 (108 X 108 X 54mm), 39383 (108 x 108 x 66.7mm), 39384 (108 x 108 x 76.1mm), 39860 (22 x 22 x 15mm), 39861 (28 x 28 x 15mm), 39862 (28 x 28 x 22mm), 39863 (35 x 35 x 22mm), 39864 (35 x 35 x 28mm), 39869 (42 x 42 x 22mm), 39865 (42 x 42 x 28mm), 39866 (42 x 42 x 35mm), 39871 (54 x 54 x 22mm), 39867 (54 x 54 x 42mm), 39368 (66.7 x 66.7 x 28mm), 39369 (66.7 x 66.7 x 35mm), 39370 (66.7 x 66.7 x 42mm), 39371 (66.7 x 66.7 x 54mm), 39372 (76.1 x 76.1 x 22mm), 39373 (76.1 x 76.1 x 28mm), 39374 (76.1 x 76.1 x 35mm), 39375 (76.1 x 76.1 x 42mm), 39376 (76.1 x 76.1 x 54mm)
• Material: Copper
• Connection: Press Fit ends with yellow HNBR gas seals
• Sizes: 22 x 22 x 15mm, 28 x 28 x 15mm, 28 x 28 x 22mm, 35 x 35 x 22mm, 35 x 35 x 28mm, 42 x 42 x 22mm, 42 x 42 x 28mm, 42 x 42 x 35mm, 54 x 54 x 22mm, 54 x 54 x 28mm, 54 x 54 x 35mm, 54 x 54 x 42mm, 66.7 x 66.7 x 28mm, 66.7 x 66.7 x 35mm, 66.7 x 66.7 x 42mm, 66.7 x 66.7 x 54mm, 76.1 x 76.1 x 22mm, 76.1 x 76.1 x 28mm, 76.1 x 76.1 x 35mm, 76.1 x 76.1 x 42mm, 76.1 x 76.1 x 54mm, 108 X 108 X 54mm, 108 x 108 x 66.7mm and 108 x 108 x 76.1mm
• Standard or approval: BS EN 1254-7 (BSI Kitemark KM 789225)
• Max pressure: 5 bar on external above-ground pipework; 1 bar inside buildings subject to fire regulations
• Suitable for: Gas pipework on hard and half-hard copper tube, fitted by a Gas Safe registered engineer
• Max temperature: -20°C to +70°C

Common Questions

What is a gas reducing branch tee?

A tee with a smaller branch than the run, for taking a supply off to an appliance.

Can I take 15mm off a 28mm gas run?

Yes, 28 x 28 x 15mm is in the list.

Why so many options?

The list covers small domestic runs up to large commercial gas mains.

Plumb Parts, 555 South Street, Glasgow G14 0QX. Collect in store or have it delivered. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.