Rothenberger ROCUT 26TC Plastic Pipe Cutter

The Rothenberger Rocut 26TC Plastic Pipe Cutter is a hand shear for cutting plastic pipe up to 26mm. It has a stainless steel blade and a direct cut action, so one squeeze gives a quick, square cut.

Using the Rothenberger Rocut 26TC plastic pipe cutter

Plastic pipe needs a clean, square end so it seals properly in Push-Fit fittings. A hacksaw leaves a ragged edge and plastic fluff that can damage O-rings. This shear cuts cleanly instead. It suits the smaller plastic pipe used on most domestic jobs, and its size makes it easy to carry.

• Brand: Rothenberger
• Cuts plastic pipe up to 26mm
• Stainless steel blade
• Direct cut shear action

Hold the pipe square in the jaw and close the handles in one smooth action. Do not twist the cutter while cutting, as that gives an angled end. Check the cut is square before fitting a pipe insert and pushing it into the fitting. Keep the blade clean and replace it when it starts to crush the pipe. The pipe slice range has bigger cutters.

Buying a pipe cutter in Glasgow

Walk in to Plumb Parts, 555 South Street, Glasgow G14 0QX. Serving Mon-Fri 8am-5pm and Sat-Sun 8am-1pm. If it suits better, order online.

Specification

• Brand: Rothenberger
• Range: Rocut TC
• Maker code: 52005
• Suitable for: Plastic pipe such as PEX and polybutylene

Common Questions

Can the Rocut 26TC cut copper?

No, it is a shear for plastic pipe only. Use a wheel cutter or pipe slice on copper.

Why does plastic pipe need a square cut?

Push Fit joints seal on the outside of the pipe, so a slanted or ragged end can miss the O ring or damage it. A clean, square cut gives the seal its best chance.

How do I keep the Rocut blade sharp?

Wipe it clean after use and do not twist the cutter while cutting. When it starts to crush the pipe instead of slicing, change the blade.