Home / BATHROOM AND KITCHEN / FloPlast Traps / FLOPLAST SINGLE BOWL SINK KIT – 76mm SEAL x 40mm

FLOPLAST SINGLE BOWL SINK KIT – 76mm SEAL x 40mm

£8.46 inc VAT (£7.05 ex VAT)

         

Free Click and Collect from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

         

FloPlast single bowl sink kit, 40mm with a 76mm seal, for kitchen sinks. Compression outlet to plastic waste pipe. Collect from 555 South Street, Glasgow.

SKU TW472
Categories
Description

The FloPlast Single Bowl Sink Kit is a sink waste kit for a single bowl kitchen sink. It is 40mm (1 1/2 inch) with a 76mm water seal trap. It suits plumbers and kitchen fitters, and householders putting in a new sink or replacing an old cracked trap.

It connects the outlet of your sink waste to a 40mm plastic waste pipe. The trap holds 76mm of water, which stops drain smells coming back up the plughole. The outlet is a compression type, so it fits onto plastic waste pipe with a nut and seal, with no glue needed. It is made from polypropylene, which copes with hot water from the sink. Check the washers are in place and do the nuts up by hand, then run the tap and look for drips.

We keep FloPlast traps and sink kits on the shelf at our Glasgow counter. Collect from the shop, or order online.

Specification

  • Brand: FloPlast
  • Range: 32/40mm Waste Traps (Sink Kits)
  • Material: Polypropylene
  • Connection: Compression outlet
  • Sizes: 40mm (1 1/2″), 76mm seal
  • Standard/approval: BS EN 274-1; seals to BS EN 681
  • Max temperature: Tested at 93 to 95°C intermittent discharge; continuous flow no hotter than 70 to 75°C
  • Suitable for: Single bowl kitchen sinks

Common Questions

What is a sink waste kit?

It is the trap and pipework that runs from the waste outlet under the sink to the waste pipe. The trap holds water to keep drain smells out of the kitchen.

What size is kitchen sink waste pipe in the UK?

Kitchen sinks normally use 40mm (1 1/2 inch) waste pipe. Basins usually use 32mm. This kit is the 40mm size.

What does the 76mm seal mean?

It is the depth of water the trap holds. A deeper seal is less likely to be pulled dry when water rushes down the pipe, so smells stay out.

How do I fit a sink waste kit?

Fit the trap to the sink waste outlet first, then line up the outlet with your waste pipe. Check each washer is seated and tighten the nuts by hand only. Run the tap for a minute and check every joint for drips.

Collect from our Glasgow shop at 555 South Street, Glasgow G14 0QX, open Mon-Fri 8am-5pm and Sat-Sun 8am-1pm, or order online for delivery.

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: TW472 Category: Tag: