Hep2O Closed Spigot Manifold 22mm

The Hep2O Closed Spigot Manifold sits at the end of a supply run and shares it out to several smaller pipes. The far end is a closed spigot, so the manifold finishes the run.

Fitting a Hep2O Closed Spigot Manifold

The body is 22mm with 15mm outlets, in 2 port or 3 port versions. A typical use is feeding a bathroom, where one 22mm supply splits to a basin, a WC and a bath. Check each outlet on the photo before you plan the pipework, so you know what each branch connects to.

Clip the manifold securely so it does not rock when pipes are pushed in. Check each joint has locked, and label the outlets so the next person knows which pipe feeds what.

All socket manifolds are also listed in our Hep2O fittings range.

Specification

• Brand: Hep2O
• Maker code: HX88/22W (2 port), HX89/22W (3 port)
• Material: Polybutylene
• Connection: 22mm Push Fit inlet socket, closed spigot end, 15mm outlets
• Sizes: 22mm x 15mm, 2 and 3 port
• Standard or approval: BS 7291 Parts 1 and 2, Class S (Kitemark)
• Max pressure: 12 bar at 20°C
• Max temperature: 95°C at up to 6 bar (114°C short fault only)
• Suitable for: Ending a 22mm run and feeding several 15mm outlets
• Guarantee: 50 years

Common Questions

What is a closed spigot on a manifold?

The far end is sealed, so the manifold ends the run. It cannot be extended from that end.

How many outlets do I need?

Count the outlets in the room, such as basin, WC and bath, and pick the 2 or 3 port. Spare ports can be blanked.

Where should the manifold sit?

Somewhere reachable under the floor or behind a panel, with isolating valves on the branches if there is room.

Manifolds in Glasgow

Plumb Parts is at 555 South Street, Glasgow G14 0QX. The doors are open Mon-Fri 8am-5pm and Sat-Sun 8am-1pm, and the website is open for orders.

Datasheets

• Wavin Hep2O Installer Guide (Key and Keyless) (PDF)