Pegler XPress Press-Fit Copper Partial Crossover 15mm to 28mm

Pegler XPress Press-Fit Copper Partial Crossover

This is a partial crossover for water and heating copper, with one male end, in 15mm, 22mm and 28mm.

Choose it when a run only needs to step over another pipe on one side, near a manifold for example. The male end goes into a press socket and is pressed by that socket rather than on its own, so mark the depth and push it fully home first.

We carry Pegler XPress Press-Fit Fittings from 15mm through to 108mm.

Fitting types you can pair with it in the Pegler XPress Press-Fit system: Copper Straight Couplers, Copper Reducing Couplers, Copper Straight Coupling Slips, Copper Straight Female Connectors, Copper Straight Male Connectors, Copper Male Reducers, Copper Female Adaptors, Copper Male Adaptors, Copper Union Coupling, Copper Equal Elbows, Copper Reduced Elbows, Copper Street Elbows, Copper Knuckle Elbows, Copper Male Elbows, Copper Female Elbows, Copper Back plate Elbows, Copper Long Pattern BackPlate Elbows, Copper 90deg Bends, Copper 45 deg Elbows, Copper Obtuse Street Elbows, Copper Crossover, Copper Partial Crossovers, Copper Full Crossovers, Copper Equal Tees, Copper Reduced Branch tees, Copper One End Reduced Tees, Copper One End Reduced And End Branch reduced Tees, Copper Both End Reduced Tees, Copper Female Branch Tees, Copper Multi Port Female Branch Tees, Copper Stop Ends, Copper Unions, Copper Straight Male Union Connectors, Copper Straight Female Union Connectors.

Xpress copper is built for all kinds of site, from a domestic boiler change to a commercial or industrial installation. Pressing the joint is quick and needs no heat, and every fitting belongs to the same system.

Main benefits of the range

• Handles temperatures from -20°C to 110°C
• Rated at 16 bar throughout that temperature range
• The Leak Before Press feature makes unpressed fittings show themselves during testing
• Approved to BS 8537:2010 with BSI Kitemark certification
• Faster to install than traditional jointing, with less labour
• No flame needed, so no hot works permit or extra insurance is required
• Backed by a wide spread of British and overseas approvals

Specification

• Brand: Pegler XPress
• Range: Xpress Copper (water)
• Maker code: 38435 (15mm), 38436 (22mm)
• Material: Copper
• Connection: Press Fit end with a male end
• Sizes: 15mm, 22mm and 28mm
• Standard or approval: BS EN 1254-7 (BSI Kitemark KM 789225)
• Max pressure: 16 bar
• Suitable for: Water services on hard and half-hard copper tube
• Max temperature: -20°C to +110°C

Common Questions

When is a partial crossover the right choice?

When a run only needs to step over another pipe on one side, for example near a manifold. It has one male end that goes into a press socket.

Does the male end need pressing?

The male end is pressed by the socket of the fitting it goes into, not on its own. Mark the depth and push it fully home first.

Is the partial crossover made in 15mm?

Yes, in 15mm, 22mm and 28mm on this listing.

Plumb Parts, 555 South Street, Glasgow G14 0QX. Collect in store or have it delivered. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Datasheets

• Pegler XPress S22 Product Datasheet (PDF)
• VSH XPress Installation Instructions (PDF)