Pegler XPress Press-Fit Copper Union Coupling 15mm to 54mm

Pegler XPress Press-Fit Copper Union Coupling

This is a union coupling for water and heating copper, in 15mm, 22mm, 28mm, 35mm, 42mm and 54mm. It joins two lengths of copper tube and can be unscrewed again.

Because it undoes, a pump, valve or meter can be taken out without cutting tube. Look at the union seal each time you open it and replace it if it is flattened or nicked.

We carry Pegler XPress Press-Fit Fittings from 15mm through to 108mm.

Fitting types you can pair with it in the Pegler XPress Press-Fit system: Copper Straight Couplers, Copper Reducing Couplers, Copper Straight Coupling Slips, Copper Straight Female Connectors, Copper Straight Male Connectors, Copper Male Reducers, Copper Female Adaptors, Copper Male Adaptors, Copper Union Coupling, Copper Equal Elbows, Copper Reduced Elbows, Copper Street Elbows, Copper Knuckle Elbows, Copper Male Elbows, Copper Female Elbows, Copper Backplate Elbows, Copper Long Pattern BackPlate Elbows, Copper Bends, Copper Obtuse Elbows, Copper Obtuse Street Elbows, Copper Crossover, Copper Partial Crossovers, Copper Full Crossovers, Copper Equal Tees, Copper Reduced Branch tees, Copper One End Reduced Tees, Copper One End Reduced And End Branch reduced Tees, Copper Both End Reduced Tees, Copper Female Branch Tees, Copper Multi Port Female Branch Tees, Copper Stop Ends, Copper Unions, Copper Straight Male Union Connectors, Copper Straight Female Union Connectors.

For domestic, commercial or industrial pipework, Xpress copper is a tidy all-round system: rapid joints, no naked flame, and matching fittings for the whole run.

Highlights of the system

• BS 8537:2010 compliant and BSI Kitemark approved
• Temperature range of -20°C to 110°C
• Holds a 16 bar pressure rating across the whole temperature span
• Leak Before Press design means a missed joint is picked up at the test stage
• Because there is no heat, no hot works permit or insurance cover is needed
• Holds many UK and international approvals
• Pressing takes less time and labour than conventional jointing
• Chrome plated versions exist for exposed pipework

Specification

• Brand: Pegler XPress
• Range: Xpress Copper (water)
• Maker code: S11; article numbers 38180 (15mm), 38181 (22mm), 38182 (28mm), 38183 (35mm), 38184 (42mm), 38185 (54mm)
• Material: Copper
• Connection: Press Fit ends with EPDM O rings
• Sizes: 15mm, 22mm, 28mm, 35mm, 42mm and 54mm
• Standard or approval: BS EN 1254-7 (BSI Kitemark KM 789225)
• Max pressure: 16 bar
• Suitable for: Water services on hard and half-hard copper tube
• Max temperature: -20°C to +110°C

Common Questions

Why fit a union coupling?

It can be undone later, so a pump, valve or meter can be taken out without cutting tube.

Should I check the union seal when I open it?

Yes, look at the seal each time and replace it if it is flattened or nicked.

What sizes do you list?

15mm, 22mm, 28mm, 35mm, 42mm and 54mm.

Plumb Parts, 555 South Street, Glasgow G14 0QX. Collect in store or have it delivered. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Datasheets

• Pegler XPress S11 Product Datasheet (PDF)
• VSH XPress Installation Instructions (PDF)