Pegler XPress Press-Fit Gas Copper Street Elbow 90 deg 15mm to 108mm

Pegler XPress Press-Fit Gas Copper Street Elbow 90 Deg

This is a 90 degree gas street elbow, with a Press Fit socket at one end and a male spigot at the other. Sizes are 15mm, 22mm, 28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm, 88.9mm and 108mm.

The spigot plugs straight into another gas press fitting, which saves cutting a short piece of tube in a tight corner.

We carry Pegler XPress Press-Fit Fittings from 15mm through to 108mm.

Fitting types you can pair with it in the Pegler XPress Press-Fit system: Copper Straight Couplers, Copper Reducing Couplers, Copper Straight Coupling Slips, Copper Straight Female Connectors, Copper Straight Male Connectors, Copper Male Reducers, Copper Female Adaptors, Copper Male Adaptors, Copper Union Coupling, Copper Equal Elbows, Copper Reduced Elbows, Gas Copper Street Elbows, Copper Knuckle Elbows, Copper Male Elbows, Copper Female Elbows, Copper Backplate Elbows, Copper Long Pattern BackPlate Elbows, Copper Bends, Copper Obtuse Elbows, Copper Obtuse Street Elbows, Copper Crossover, Copper Partial Crossovers, Copper Full Crossovers, Copper Equal Tees, Copper Reduced Branch tees, Copper One End Reduced Tees, Copper One End Reduced And End Branch reduced Tees, Copper Both End Reduced Tees, Copper Female Branch Tees, Copper Multi Port Female Branch Tees, Copper Stop Ends, Copper Unions, Copper Straight Male Union Connectors, Copper Straight Female Union Connectors.

Xpress copper is built for all kinds of site, from a domestic boiler change to a commercial or industrial installation. Pressing the joint is quick and needs no heat, and every fitting belongs to the same system.

Main benefits of the range

• Gas rating: -20°C to +70°C
• Gas rating: 5 bar on external above-ground pipework, 1 bar inside buildings
• The Leak Before Press feature makes unpressed fittings show themselves during testing
• Approved to BS 8537:2010 with BSI Kitemark certification
• Approved by numerous British and international bodies
• Quick to joint, which saves time and labour against traditional methods
• Heat-free jointing means hot works permits and the related insurance are not needed
• Chrome plated versions exist for exposed pipework

Full gas limits are in the Specification below.

Specification

• Brand: Pegler XPress
• Range: Xpress Copper Gas
• Maker code: SG12S; article numbers 39790 (15mm), 39791 (22mm), 39792 (28mm), 39793 (35mm), 39794 (42mm), 39795 (54mm), 39346 (66.7mm), 39347 (76.1mm), 39349 (108mm)
• Material: Copper
• Connection: Press Fit end with a male spigot end
• Sizes: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm, 88.9mm and 108mm
• Standard or approval: BS EN 1254-7 (BSI Kitemark KM 789225)
• Max pressure: 5 bar on external above-ground pipework; 1 bar inside buildings subject to fire regulations
• Suitable for: Gas pipework on hard and half-hard copper tube, fitted by a Gas Safe registered engineer
• Max temperature: -20°C to +70°C

Common Questions

What is a 90 degree gas street elbow?

One end presses onto tube and the other plugs into another gas press fitting.

Why use one instead of an elbow?

It saves a short piece of tube in tight corners.

Which sizes do you list?

15mm up to 108mm.

Plumb Parts, 555 South Street, Glasgow G14 0QX. Collect in store or have it delivered. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Datasheets

• Pegler XPress SG12S Product Datasheet (PDF)
• VSH XPress Installation Instructions (PDF)