Pegler XPress SS30 Stainless Steel Female Branch Tee 15mm to 108mm

The Pegler XPress 316 Stainless Steel Female Branch Tee, maker code SS30, is a tee with a press socket on both run ends and a BSP parallel female thread on the branch for the XPress Stainless press fit system. We list it in 15mm x 15mm x 1/2″, 22mm x 22mm x 1/2″, 22mm x 22mm x 3/4″, 28mm x 28mm x 1/2″, 28mm x 28mm x 3/4″, 35mm x 35mm x 1/2″, 35mm x 35mm x 3/4″, 42mm x 42mm x 1/2″, 42mm x 42mm x 3/4″, 54mm x 54mm x 1/2″, 54mm x 54mm x 3/4″, 54mm x 54mm x 1″, 54mm x 54mm x 2″, 76.1mm x 76.1mm x 3/4″, 76.1mm x 76.1mm x 2″, 88.9mm x 88.9mm x 3/4″, 88.9mm x 88.9mm x 2″, 108mm x 108mm x 3/4″, 108mm x 108mm x 2″ for plumbers and mechanical contractors on commercial water and heating work in Glasgow and the West of Scotland.

Use it for a drain cock, gauge, sensor or threaded branch off the main. Sizes are listed run x run x thread. It is made of 316L stainless steel (1.4404) with an EPDM sealing ring, so it suits drinking water, heating, chilled water and compressed air. Every size, the XPress 316 Stainless Steel Female Branch Tee 54mm x 54mm x 2″ included, can be bought online or over our South Street counter.

XPress uses the M press profile. Mark the insertion depth on the tube before you push it in, so you know it is fully home before you press.

Elbows, tees and couplings to go with it are in our Pegler XPress 316 stainless steel press fit range.

Specification

• Brand: Pegler XPress (VSH, Aalberts IPS)
• Range: XPress Stainless
• Maker code: SS30; article numbers 11759 (15mm x 15mm x 1/2″), 11762 (22mm x 22mm x 1/2″), 11763 (22mm x 22mm x 3/4″), 11765 (28mm x 28mm x 1/2″), 11766 (28mm x 28mm x 3/4″), 11767 (35mm x 35mm x 1/2″), 11768 (35mm x 35mm x 3/4″), 11769 (42mm x 42mm x 1/2″), 11770 (42mm x 42mm x 3/4″), 11771 (54mm x 54mm x 1/2″), 11773 (54mm x 54mm x 3/4″), 11630 (54mm x 54mm x 1″), 11772 (54mm x 54mm x 2″), 20452 (76.1mm x 76.1mm x 3/4″), 20453 (76.1mm x 76.1mm x 2″), 20454 (88.9mm x 88.9mm x 3/4″), 20455 (88.9mm x 88.9mm x 2″), 20456 (108mm x 108mm x 3/4″), 20457 (108mm x 108mm x 2″)
• Type: Female Branch Tee
• Material: 316 stainless steel, grade 316L (1.4404)
• Seal: EPDM sealing ring, M press profile
• Sizes: 15mm x 15mm x 1/2″, 22mm x 22mm x 1/2″, 22mm x 22mm x 3/4″, 28mm x 28mm x 1/2″, 28mm x 28mm x 3/4″, 35mm x 35mm x 1/2″, 35mm x 35mm x 3/4″, 42mm x 42mm x 1/2″, 42mm x 42mm x 3/4″, 54mm x 54mm x 1/2″, 54mm x 54mm x 3/4″, 54mm x 54mm x 1″, 54mm x 54mm x 2″, 76.1mm x 76.1mm x 3/4″, 76.1mm x 76.1mm x 2″, 88.9mm x 88.9mm x 3/4″, 88.9mm x 88.9mm x 2″, 108mm x 108mm x 3/4″, 108mm x 108mm x 2″
• Max pressure: 16 bar (PN16)
• Suitable for: Drinking water, heating, chilled water and compressed air

Common Questions

What thread is on the SS30 branch? A BSP parallel female thread (Rp). Sizes are listed run x run x thread, so 28mm x 28mm x 1/2″ is a 28mm run with a 1/2 inch female branch.

Is this 304 or 316 stainless steel? 316. Pegler make XPress Stainless fittings in 316L stainless steel (1.4404).

Do you have the XPress 316 Stainless Steel Female Branch Tee 54mm x 54mm x 2″ in stock in Glasgow? Yes. Every size shows In Stock and can be collected from our counter.

Which press jaws do I need for XPress Stainless? XPress uses the M profile, so use M profile jaws of the right size on a compatible press tool.

Call in at our counter, 555 South Street, Glasgow G14 0QX, or buy online. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm. Tel: 0141 404 5128.