Tectite Sprint Female Elbow 90 Degree 15mm x 1/2 inch TT14

Tectite Sprint Female Elbow 90 Degree 15mm x 1/2 inch

£8.39 inc VAT (£6.99 ex VAT)

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

Brass Tectite Sprint push-fit female elbow 90 degree, maker code TT14. In 15mm x 1/2 inch. Collect from Plumb Parts Glasgow, 555 South Street G14 0QX.

SKU

Thumbnail

Size

Price

Quantity

Total

Select All

75545

15mm x 1/2"

£8.39 inc VAT (£6.99 ex VAT)

£8.39 inc VAT

The Tectite Sprint Female Elbow 90 Degree turns from push-fit pipe to a female BSP thread at a right angle, ready for a male tail, drain cock or valve.

Sizes: 15mm x 1/2 inch.

Cut the pipe square, take off the burr, mark the insert depth and push the pipe in with a slight twist until it clicks home. Check the mark sits at the mouth of the fitting and give it a firm pull. No heat, no flux and no spanners on the push-fit end. Sprint joints are permanent: they cannot be taken apart and used again.

Specification

Brand: Tectite Sprint
Range: Tectite Sprint push-fit
Maker code: TT14; article numbers 75545 (15mm x 1/2″)
Material: Brass
Connection: Push-fit x female BSP thread, 90 degree
Sizes: 15mm x 1/2 inch
Pipe: Plain or chrome plated copper to BS EN 1057, PEX and PB plastic pipe to BS 7291 (with a pipe insert)
Rating on copper: 20 bar from -24°C to 30°C, 10 bar at 114°C
Rating on PEX and PB: 12 bar at -20°C, 3 bar at 92°C
Approval: WRAS approved
Demountable: No, the joint is permanent
Suitable for: Hot and cold water, central heating and chilled water. Not for gas

Common Questions

How do I seal the thread?
Use PTFE tape or a WRAS approved jointing paste on the male thread before you screw it in.

Can a Tectite Sprint fitting be taken apart?
No. Sprint fittings are not demountable. Once the pipe is pushed home the joint is permanent, so cut the pipe if you need to change it.

Do Tectite Sprint fittings need pipe inserts?
Not on copper. On PEX or PB plastic pipe, fit a pipe insert first so the pipe keeps its shape and seals properly.

Can Tectite Sprint go on gas?
No. Use it on water, heating and chilled water only.

Genuine Tectite Sprint stock. Collect from Plumb Parts, 555 South Street, Glasgow G14 0QX. Tel: 0141 404 5128. Open 7 days: Monday to Friday 8am to 5pm, Saturday and Sunday 8am to 1pm.