Home » Shop – Plumb Parts » XPRESS YORKSHIRE PRESS-FIT COPPER FEMALE UNION ADAPTOR 15mm to 54mm

XPRESS YORKSHIRE PRESS-FIT COPPER FEMALE UNION ADAPTOR 15mm to 54mm

Price range: £24.12 through £76.38 inc VAT ( Price range: £20.10 through £63.65 ex VAT)

The Xpress Yorkshire Press-Fit Copper Female Union Adaptor joins copper to a male thread with a union you can split, from 15mm x 1/2 inch to 54mm x 2 inch. It is good at pumps. From Plumb Parts in Glasgow.

         
SKUThumbnail SIZE PriceQuantityTotal
PYUF15D XPRESS YORKSHIRE PRESS-FIT COPPER FEMALE UNION ADAPTOR 15mm to 54mm - 15mm x 1/2 15mm x 1/2" £24.12 inc VAT (£20.10 ex VAT)
-
+
£24.12 inc VAT ({price_excluding_tax} ex VAT)
✓
spinner
PYUF22E XPRESS YORKSHIRE PRESS-FIT COPPER FEMALE UNION ADAPTOR 15mm to 54mm - 22mm x 3/4 22mm x 3/4" £35.56 inc VAT (£29.63 ex VAT)
-
+
£35.56 inc VAT ({price_excluding_tax} ex VAT)
✓
spinner
PYUF22F XPRESS YORKSHIRE PRESS-FIT COPPER FEMALE UNION ADAPTOR 15mm to 54mm - 22mm x 1 22mm x 1" £37.92 inc VAT (£31.60 ex VAT)
-
+
£37.92 inc VAT ({price_excluding_tax} ex VAT)
✓
spinner
PYUF28E XPRESS YORKSHIRE PRESS-FIT COPPER FEMALE UNION ADAPTOR 15mm to 54mm - 28mm x 3/4 28mm x 3/4" £43.80 inc VAT (£36.50 ex VAT)
-
+
£43.80 inc VAT ({price_excluding_tax} ex VAT)
✓
spinner
PYUF28F XPRESS YORKSHIRE PRESS-FIT COPPER FEMALE UNION ADAPTOR 15mm to 54mm - 28mm x 1 28mm x 1" £39.50 inc VAT (£32.92 ex VAT)
-
+
£39.50 inc VAT ({price_excluding_tax} ex VAT)
✓
spinner
PYUF35G XPRESS YORKSHIRE PRESS-FIT COPPER FEMALE UNION ADAPTOR 15mm to 54mm - 35mm x 1.1/4 35mm x 1.1/4" £43.67 inc VAT (£36.39 ex VAT)
-
+
£43.67 inc VAT ({price_excluding_tax} ex VAT)
✓
spinner
PYUF42H XPRESS YORKSHIRE PRESS-FIT COPPER FEMALE UNION ADAPTOR 15mm to 54mm - 42mm x 1.1/2 42mm x 1.1/2" £57.43 inc VAT (£47.86 ex VAT)
-
+
£57.43 inc VAT ({price_excluding_tax} ex VAT)
✓
spinner
PYUF54I XPRESS YORKSHIRE PRESS-FIT COPPER FEMALE UNION ADAPTOR 15mm to 54mm - 54mm x 2 54mm x 2" £76.38 inc VAT (£63.65 ex VAT)
-
+
£76.38 inc VAT ({price_excluding_tax} ex VAT)
✓
spinner
         
Description

Where copper tube has to meet a male threaded tail and you want to be able to split it later, the Xpress Yorkshire Press-Fit Copper Female Union Adaptor is the fitting. One end presses onto the copper, the other is a female BSP thread, with a union in between.

What it’s used for

It suits pumps with male threaded unions, valve bodies, cylinder connections and any threaded kit you may want to remove for servicing. The union lets you undo the joint with a spanner instead of cutting out the pipe.

Xpress copper is for hot and cold water, vented and unvented heating and chilled water. Use the yellow Xpress Gas fittings for gas work.

Sizes available

There is a wide spread, including the odd reducing combinations:

  • 15mm x 1/2″
  • 22mm x 3/4″ and 22mm x 1″
  • 28mm x 3/4″ and 28mm x 1″
  • 35mm x 1.1/4″
  • 42mm x 1.1/2″
  • 54mm x 2″

Fitting tips

Do the threaded end first and seal it properly, then press the copper so you aren’t putting twist into the press joint. Check the copper is cut square and deburred, and mark how far it goes in.

The male version and other threaded adaptors are listed with our Xpress copper Press-Fit fittings.

Union adaptors in Glasgow

Call in at the Plumb Parts trade counter on 555 South Street, Glasgow G14 0QX, or order online. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Specification

  • Brand: Pegler Yorkshire
  • Range: Xpress Copper
  • Maker code: S69F
  • Connection: Press Fit with EPDM seal, union, female BSP thread
  • Sizes: 15mm x 1/2″, 22mm x 3/4″, 22mm x 1″, 28mm x 3/4″, 28mm x 1″, 35mm x 1.1/4″, 42mm x 1.1/2″ and 54mm x 2″
  • Standard or approval: EN 1254-7 press fittings, BSI certificate KM 789225 (water fittings)
  • Max pressure: 16 bar
  • Suitable for: Hot and cold water, heating and chilled water on hard and half-hard copper tube; not gas

Common Questions

Why fit a union adaptor on a pump?

The union lets you undo the joint with a spanner and lift the pump out, without cutting copper. Fit one either side with isolating valves.

Which sizes take a 1 inch male tail?

The 22mm x 1″ and 28mm x 1″. The 28mm x 3/4″ is there for smaller tails on a 28mm pipe.

Do I press before or after tightening the union?

Make the threaded joint first, then press the copper, then close the union. That keeps twisting off the pressed seal.

Additional information
SIZE

15mm x 1/2"

,

22mm x 3/4"

,

22mm x 1"

,

28mm x 3/4"

,

28mm x 1"

,

35mm x 1.1/4"

,

42mm x 1.1/2"

,

54mm x 2"