Pegler XPress SS69 Stainless Steel Male Union Connector 15mm to 54mm

The Pegler XPress 316 Stainless Steel Male Union Connector, maker code SS69, is a straight union with a press socket on one end and a BSP taper male thread on the other for the XPress Stainless press fit system. We list it in 15mm x 1/2″, 22mm x 1/2″, 22mm x 3/4″, 22mm x 1″, 28mm x 1″, 35mm x 1 1/4″, 42mm x 1 1/2″, 54mm x 2″ for plumbers and mechanical contractors on commercial water and heating work in Glasgow and the West of Scotland.

The union lets you undo the joint later to take out a pump, meter or valve without cutting the tube. Threaded sizes are listed as tube size x BSP thread size. It is made of 316L stainless steel (1.4404) with an EPDM sealing ring, so it suits drinking water, heating, chilled water and compressed air. Every size, the XPress 316 Stainless Steel Male Union Connector 54mm x 2″ included, can be bought online or over our South Street counter.

XPress uses the M press profile. Mark the insertion depth on the tube before you push it in, so you know it is fully home before you press.

Elbows, tees and couplings to go with it are in our Pegler XPress 316 stainless steel press fit range.

Specification

• Brand: Pegler XPress (VSH, Aalberts IPS)
• Range: XPress Stainless
• Maker code: SS69; article numbers 11774 (15mm x 1/2″), 11721 (22mm x 1/2″), 11779 (22mm x 3/4″), 11764 (22mm x 1″), 11781 (28mm x 1″), 11782 (35mm x 1 1/4″), 11783 (42mm x 1 1/2″), 11784 (54mm x 2″)
• Type: Male Union Connector
• Material: 316 stainless steel, grade 316L (1.4404)
• Seal: EPDM sealing ring, M press profile
• Sizes: 15mm x 1/2″, 22mm x 1/2″, 22mm x 3/4″, 22mm x 1″, 28mm x 1″, 35mm x 1 1/4″, 42mm x 1 1/2″, 54mm x 2″
• Max pressure: 16 bar (PN16)
• Suitable for: Drinking water, heating, chilled water and compressed air

Common Questions

Why use a union connector? The union nut lets you break the joint and remake it, so equipment can be taken out for service without cutting the tube. Threaded sizes are listed as tube size x BSP thread size.

Is this 304 or 316 stainless steel? 316. Pegler make XPress Stainless fittings in 316L stainless steel (1.4404).

Do you have the XPress 316 Stainless Steel Male Union Connector 54mm x 2″ in stock in Glasgow? Yes. Every size shows In Stock and can be collected from our counter.

Which press jaws do I need for XPress Stainless? XPress uses the M profile, so use M profile jaws of the right size on a compatible press tool.

Call in at our counter, 555 South Street, Glasgow G14 0QX, or buy online. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm. Tel: 0141 404 5128.