Home / Pipes Hoses & Insulation / Copper Pipe / Copper Pipe 28mm

Copper Pipe 28mm

Price range: £13.36 through £64.03 inc VAT ( Price range: £11.13 through £53.36 ex VAT)

         

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns

Delivered Free in Glasgow. Free delivery to any G postcode, or collect in store from 555 South Street, Glasgow G14 0QX.

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

         

Straight 28mm copper in 1m, 2m, 3m and 6m lengths, listed as copper pipe coil 28mm. Used for larger heating systems, cylinder primaries and cold mains with heavy demand. Pick it up at Plumb Parts in Glasgow.

SKUThumbnail Length Delivery Details PriceQuantityTotal
CPL281 Copper Pipe 28mm - 1m - In Store Collection Only 1m In Store Collection Only £13.36 inc VAT (£11.13 ex VAT)
-
+
£13.36 inc VAT
✓
spinner
CPL282 Copper Pipe 28mm - 2m - In Store Collection Only 2m In Store Collection Only £27.77 inc VAT (£23.14 ex VAT)
-
+
£27.77 inc VAT
✓
spinner
CPL283 Copper Pipe 28mm - 3m - In Store Collection Only 3m In Store Collection Only £36.30 inc VAT (£30.25 ex VAT)
-
+
£36.30 inc VAT
✓
spinner
CPL286 Copper Pipe 28mm - 6m - Special Order 2 to 3 Days for In Store Collection 6m Special Order 2 to 3 Days for In Store Collection £64.03 inc VAT (£53.36 ex VAT)
-
+
£64.03 inc VAT
✓
spinner
Description

Despite the copper pipe coil 28mm listing name, this is straight 28mm Copper Pipe, between domestic 22mm and the larger commercial sizes. You’ll use it on bigger houses, system boilers with high outputs, cylinder primaries, and mains where a lot of outlets draw at once. It comes in 1m, 2m, 3m and 6m.

It’s common on heating flow and return for larger systems, gas supplies sized for higher demand, and incoming cold mains in small commercial buildings. Check the print on the tube if a spec asks for a particular grade.

Straight lengths, not copper pipe coil 28mm

  • 1m length
  • 2m length
  • 3m length
  • 6m length

These are collected from the counter.

Compression, End Feed, Solder Ring, Press Fit and Push Fit fittings all come in 28mm, so it matches whichever system is already in. It needs more heat to solder than 15mm or 22mm, so give each joint time and keep the flux tidy. A 28mm bender or hydraulic bender will do gentle sets, but tight corners are quicker with elbows. Use a cutter big enough for the job and deburr every end. On heating runs, leave space for expansion and don’t trap the pipe hard between joists.

You’ll probably need 28mm clips, reducers to 22mm, and fittings to suit. Browse our full copper pipe section for other diameters.

Picking up 28mm copper tube in Glasgow

Come down to Plumb Parts, 555 South Street, Glasgow G14 0QX to collect. The counter runs Mon-Fri 8am-5pm and Sat-Sun 8am-1pm, and online orders are fine.

Specification

  • Material: Copper
  • Sizes: 28mm, in 1m, 2m, 3m or 6m lengths
  • Suitable for: Larger heating systems, primaries and busy cold mains

Common Questions

Can I bend 28mm copper pipe? Not really by hand, as half-hard 28mm needs a stand bender or hydraulic bender for a clean bend. For tight corners an elbow is quicker and neater.

What is 28mm copper pipe used for? It’s for hot and cold water, central heating and gas where the flow is high or the run is long, like heat pump primaries, bigger system boilers or a cold main feeding lots of outlets. Gas pipe sizing should always be worked out by a Gas Safe engineer.

What is the inside diameter of 28mm copper pipe? The 28mm is the outside diameter, and standard UK tube has a 0.9mm wall, so the inside works out at about 26.2mm. Both the 3m and 6m lengths are collected from our counter on South Street, and the 6m needs a roof rack.

Is copper pipe size measured inside or outside? In the UK, copper pipe is sized by its outside diameter, so 28mm means 28mm across the outside of the tube.

How do I cut 28mm copper pipe? A pipe cutter that opens to 28mm gives the neatest, squarest cut, though a fine-tooth hacksaw will do. Take the burr off the inside and outside of the end before you fit it.

How do I solder 28mm copper pipe? Clean and flux both the pipe and the fitting, push the pipe fully home, then heat evenly until the solder shows all the way round. A 28mm joint soaks up more heat than smaller sizes, so take your time.

What fittings can I use with 28mm copper pipe? It takes any 28mm compression, end feed, solder ring, press or push-fit fitting. Reducing tees and reducers let you drop down to 22mm or 15mm for the branches.

Additional information
Length1m, 2m, 3m, 6m
Delivery DetailsIn Store Collection Only, Special Order 2 to 3 Days for In Store Collection
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.