FloPlast Solvent Soil 92.5° Triple Socket Branch – SS191 110mm

A glued soil stack takes its WC connection through the FloPlast Solvent Soil 92.5° Triple Socket Branch SS191. It is a 110mm branch with solvent sockets on all three ends.

Fitting the FloPlast Solvent Soil 92.5° Triple Socket Branch SS191

Its inlet angle is slightly beyond square, which gives the incoming pipe a little fall. Plain-ended soil pipe goes into each socket. Once glued, the joints are fixed and will not creep apart.

Work out the branch height from the WC outlet before you cut anything. Dry fit, mark the fitting and the pipes, then cement one joint at a time and hold each until it grabs.

Fix brackets either side of the junction to keep the WC pipe from twisting the stack.

Plan a rodding point near the foot of the stack, because a branch on its own gives no access. Check the pan connector lines up before the last joint is glued.

Solvent soil branches in Glasgow

Bends, clips and access fittings are in the Flexible range too. Anyone can call at the Plumb Parts counter, 555 South Street, Glasgow G14 0QX, Mon-Fri 8am-5pm and Sat-Sun 8am-1pm, or order online for collection.

Specification

• Brand: FloPlast
• Range: 110mm Solvent Soil
• Maker code: SS191
• Material: PVC-U
• Connection: Solvent socket on all three ends, 92.5 degree branch
• Sizes: 110mm
• Standard or approval: BS EN 1329-1 and BS EN 1453-1, Kitemark KM 544331
• Max temperature: 70°C to 75°C continuous; hotter discharges for 2 minutes at most
• Suitable for: WC connections on glued soil stacks

Common Questions

Does a solvent branch give any rodding access?

No, so plan a rodding point near the foot of the stack. An access pipe or access bend does the job.

Can the branch be turned after gluing?

No. Line it up with the pan connector before the last joint is cemented.

How is the branch height worked out?

From the WC outlet, allowing a fall into the stack. Measure before cutting any pipe.