JG SPEEDFIT MDPE STOP TAP
Price range: £25.42 through £84.98 inc VAT ( Price range: £21.18 through £70.82 ex VAT)
The JG Speedfit MDPE stop tap shuts off a cold water supply with Push-Fit ends. It comes straight in 20mm, 25mm and 32mm, with 25mm x 15mm and 25mm x 22mm versions for going onto copper. Sold at Plumb Parts in Glasgow.
| SKU | Thumbnail | Size | Price | Quantity | Total | ||
|---|---|---|---|---|---|---|---|
| PR01370 |
|
20X20mm | £39.98 inc VAT (£33.32 ex VAT) |
-
+
|
£39.98 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR01371 |
|
25X25mm | £25.42 inc VAT (£21.18 ex VAT) |
-
+
|
£25.42 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR01372 |
|
25X15mm | £42.48 inc VAT (£35.40 ex VAT) |
-
+
|
£42.48 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR01373 |
|
25X22mm | £42.48 inc VAT (£35.40 ex VAT) |
-
+
|
£42.48 inc VAT ({price_excluding_tax} ex VAT) | ||
| PR01374 |
|
32X32mm | £84.98 inc VAT (£70.82 ex VAT) |
-
+
|
£84.98 inc VAT ({price_excluding_tax} ex VAT) |
Fitting a JG Speedfit MDPE stop tap gives you a way to shut off the water on a blue MDPE supply. It is Push-Fit, so it goes in quickly, even in a wet hole.
Choosing a JG Speedfit MDPE stop tap
The straight versions go in line on an MDPE run, for example on a branch to an outbuilding or at the start of a garden supply. The 25mm x 15mm and 25mm x 22mm versions take the MDPE in one end and copper out the other. So they suit the point where the supply comes into the house.
- MDPE both ends: 20mm x 20mm, 25mm x 25mm, 32mm x 32mm
- MDPE to copper: 25mm x 15mm and 25mm x 22mm
- Push-Fit connections that can be undone
- For cold mains water
Put an insert in every MDPE pipe end. Copper wants a square cut and the burr taken off before it goes in. Fit the tap where it can be reached and turned without a fight, and check for any flow direction marked on the body before pushing the pipes home. Open it slowly when the water goes back on.
Stop taps from our Glasgow counter
Elbows, tees and adaptors are in our MDPE and alkathene fittings range.
Come to Plumb Parts, 555 South Street, Glasgow G14 0QX, Mon-Fri 8am-5pm or Sat-Sun 8am-1pm. Online ordering is open too.
Specification
- Brand: JG Speedfit
- Range: MDPE cold water services fittings
- Connection: Push Fit, pipe insert needed in each MDPE end
- Sizes: 20mm x 20mm, 25mm x 25mm, 25mm x 15mm, 25mm x 22mm and 32mm x 32mm
- Standard or approval: Water Regulations Advisory Scheme approved (JG Speedfit technical guide)
- Max pressure: 16 bar at 20°C
- Max temperature: Cold water only, rated at 20°C
- Suitable for: Blue MDPE (PE80) cold water service pipe, above or below ground
Common Questions
Which stop tap do I need where the supply enters the house?
Use the 25mm x 15mm or 25mm x 22mm, which take MDPE in and copper out. The equal sizes go in line on MDPE runs.
Can an MDPE stop tap go in the ground?
JG Speedfit make these for cold water services above or below ground. If it is buried, put it in a stop tap chamber so it can be reached.
Why should I turn it on slowly?
Opening slowly lets air and debris clear without banging the pipes. It also eases the load on new joints.
| Size |
20X20mm ,25X25mm ,25X15mm ,25X22mm ,32X32mm |
|---|
Related products
FLOPLAST MDPE REDUCING TEE
Price range: £12.24 through £21.24 inc VAT ( Price range: £10.20 through £17.70 ex VAT)
JG SPEEDFIT MDPE WALLPLATE ELBOW
Price range: £19.48 through £26.98 inc VAT ( Price range: £16.23 through £22.48 ex VAT)
