Home / MDPE and Alkathene Fittings / JG Speedfit MDPE Wallplate Elbow 20mm to 25mm

JG Speedfit MDPE Wallplate Elbow 20mm to 25mm

Price range: £19.48 through £26.98 inc VAT ( Price range: £16.23 through £22.48 ex VAT)

         

✓ In Stock

Free Click and Collect, no minimum order, from our Glasgow counter at 555 South Street, G14 0QX. Open Mon-Fri 8am-5pm, Sat-Sun 8am-1pm.

Delivery: free UK mainland delivery on orders over £250, or £12 + VAT under £250. In stock orders placed by 2pm Monday to Friday usually go out for next working day delivery. Returns: 14 days. Call 0141 404 5128 for a return number first. Delivery and Returns

Trade and public welcome at 555 South Street, Glasgow G14 0QX. Call 0141 404 5128.

         

The JG Speedfit MDPE wallplate elbow fixes to a wall and turns an MDPE supply onto a female thread. Sizes 20mm x 1/2 inch, 25mm x 1/2 inch and 25mm x 3/4 inch. From Plumb Parts in Glasgow.

SKUThumbnail Size PriceQuantityTotal
UGPWB2014 JG Speedfit MDPE Wallplate Elbow 20mm to 25mm - 20mmX1/2 20mmX1/2" £19.48 inc VAT (£16.23 ex VAT)
-
+
£19.48 inc VAT
✓
spinner
UGPWB2514 JG Speedfit MDPE Wallplate Elbow 20mm to 25mm - 25mmX1/2 25mmX1/2" £20.48 inc VAT (£17.07 ex VAT)
-
+
£20.48 inc VAT
✓
spinner
UGPWB2516 JG Speedfit MDPE Wallplate Elbow 20mm to 25mm - 25mmX3/4 25mmX3/4" £26.98 inc VAT (£22.48 ex VAT)
-
+
£26.98 inc VAT
✓
spinner
Description

For a firm fixing point where a blue water supply comes up a wall, fit the JG Speedfit MDPE wallplate elbow. The pipe pushes into one end, and the other end is a female thread for a tap or valve.

Where an MDPE wallplate elbow is used

It is used for standpipes, garden taps, yard taps and supplies into sheds and stables. The plate screws to the wall or a post, so when someone yanks a hose the fitting takes the strain, not the pipe. For example, a 20mm supply up a garage wall to a 1/2 inch outside tap.

  • 20mm x 1/2 inch
  • 25mm x 1/2 inch
  • 25mm x 3/4 inch
  • Wall plate for screw fixing, Push-Fit pipe end

Fix the plate solidly with screws and plugs before you connect anything. Seal the tap thread with PTFE tape. Then push the MDPE in with an insert fitted. On an outside wall, think about frost: lag the pipe and fit an isolating valve inside so the tap can be drained down for winter.

Outside tap parts in Glasgow

Elbows, couplers and stop taps are listed under MDPE and alkathene fittings.

Buy it from Plumb Parts, 555 South Street, Glasgow G14 0QX. Counter hours are Mon-Fri 8am-5pm and Sat-Sun 8am-1pm, and the website takes orders too.

Specification

  • Brand: JG Speedfit
  • Range: MDPE cold water services fittings
  • Maker code: UGPWB2014 (20mmX1/2″), UGPWB2514 (25mmX1/2″), UGPWB2516 (25mmX3/4″)
  • Connection: Push Fit for MDPE pipe with pipe insert, female thread, wall plate
  • Sizes: 20mm x 1/2″, 25mm x 1/2″ and 25mm x 3/4″
  • Standard or approval: Water Regulations Advisory Scheme approved (JG Speedfit technical guide)
  • Max pressure: 16 bar at 20°C
  • Max temperature: Cold water only, rated at 20°C
  • Suitable for: Blue MDPE (PE80) cold water service pipe, above or below ground

Common Questions

Can a wallplate elbow take a garden tap?

Yes, a tap with a male thread screws straight into the female outlet. Fix the plate to brickwork or a sturdy post before anything else, so a pulled hose does not strain the pipe.

How do I stop an outside tap freezing in winter?

Lag the pipe where it comes up the wall and fit an isolating valve indoors. Then the outside section can be shut off and drained before a hard frost.

Which wallplate elbow suits a 3/4 inch yard tap?

The 25mm x 3/4″ size, on a 25mm supply. The 25mm x 1/2″ is there for a standard 1/2″ tap on the bigger pipe.

Datasheets

Additional information
Size20mmX1/2″, 25mmX1/2″, 25mmX3/4″, 28mm, 35X35mm, 42X42mm, 54X54mm, 67X67mm, 76X76mm, 108X108mm
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.